AZDEL C401-B01 Azdel Polypropylene, Unspecified (Glass Fiber Reinforcement, 40%)

Product Description
AZDEL C401-B01 is a glass mat thermoplastic laminate based upon random oriented chopped fiber mat contained within polypropylene resin matrix. This composite material features high flow properties and a very homogeneous fiber distribution. This material is typically used for standard semi-structural thin wall applications and where good glass distribution into features such as ribs and bosses is desired.
General
Material Status	Commercial: Active
Availability	North America
Filler / Reinforcement	Glass Fiber Reinforcement, 40% Filler by Weight
Automotive Specifications
Appearance	Black
Forms	Sheet

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Molding Shrinkage - Flow		in/in	ASTM D955
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Instrumented Dart Impact			ASTM D3763
0.157 in, Energy at Peak Load		in·lb
0.157 in, Total Energy		in·lb
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)		°F	ASTM D648
Flammability	Nominal Value	Unit	Test Method
Burning Rate		in/min	ISO 3795
Additional Information
Basis Weight, Internal Test Method: 0.9 lbs/ft² Filler Content by Weight(ashing), Internal Test Method: 40 % Multi-axial Impact Peak Force, ASTM D3763, 4mm: 558 lbs Notched Izod Impact, ISO 180, 23°C, 4mm: 469 J/m Poissons Ratio, ISO 527: 0.333 Sheet Thickness, Internal Test Method: 142 mils Specific Gravity, ASTM D792, Laminated: 1.17 Specific Gravity, ASTM D792, Molded: 1.19
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AZDEL* C401-B01, AZDEL C401B01, AZDEL* , AZDEL, AZDELC401B01, C 401, C 401 B 01, C401-B01, C401B01, C401:B01, C401/B01, C401+B01, C401_B01, C401 B01, C401, 401B, B01, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 401C
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (1).

Notes

¹Typical properties: these are not to be construed as specifications.

AZDEL* C401-B01

Polypropylene

Glass Fiber Reinforcement, 40%

Supplied by Azdel, Inc.