IDES Prospector Already have an account? Login Here

IDES

AZDEL* C507-B01

Polypropylene

Glass Fiber Reinforcement, 50%; Mineral Filler

Supplied by Azdel, Inc.

The technical datasheet with complete property values for AZDEL* C507-B01 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
AZDEL C507-B01 is a glass mat thermoplastic laminate based upon random oriented chopped fiber mat and mineral filler contained within polypropylene resin matrix. This composite material features high flow properties and a very homogeneous fiber distribution and exhibits low part warpage after molding. This material is typically used for standard semi-structural thin wall applications and where good glass distribution into features such as ribs and bosses is desired.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 50% Filler by Weight
  • Mineral Filler
  
Appearance 
  • Black
Forms 
  • Sheet
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Instrumented Dart Impact
     ASTM D3763
0.157 in, Energy at Peak Load
in·lb
  
0.157 in, Total Energy
in·lb
  
Additional Information
Basis Weight, Internal Test Method: 1.12 lbs/ft²
Filler Content by Weight(ashing), Internal Test Method: 50 %
Multi-axial Impact Peak Force, ASTM D3763, 4mm: 945 lbs
Notched Izod Impact, ISO 180, 23°C, 4mm: 35.3 kJ/m² J/m
Poissons Ratio, ISO 527: 0.234
Sheet Thickness, Internal Test Method: 165 mils
Specific Gravity, ASTM D792, Laminated: 1.29
Specific Gravity, ASTM D792, Molded: 1.31
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AZDEL* C507-B01, AZDEL C507B01, AZDEL* , AZDEL, AZDELC507B01, C 507, C 507 B 01, C507-B01, C507B01, C507:B01, C507/B01, C507+B01, C507_B01, C507 B01, C507, 507B, B01, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 507C
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.