AZDEL C200B01N Azdel Polypropylene Alloy (Long Glass Fiber, 20%)

Product Description
Azdel® C200B01N is a chopped fiber material based on random oriented long chopped glass fiber mat (paper making process). This polypropylene composite material features high flow properties and a very homogeneous fiber distribution. This material is typically used for standard semi-structural, thin walled applications.
General
Material Status	Commercial: Active
Availability	Europe
Filler / Reinforcement	Long Glass Fiber, 20% Filler by Weight
Features	High Flow
Uses	Laminates
Forms	Sheet
Processing Method	Compression Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage		%	ISO 294-4
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Unnotched Impact Strength		ft·lb/in²	ISO 179/2fnU
Multi-Axial Instrumented Impact Energy			ISO 6603-2
0.157 in, Energy to Peak Force		ft·lb
0.157 in, Total Penetration Energy		ft·lb
Multi-Axial Instrumented Impact Peak Force (0.157 in)		lbf	ISO 6603-2
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Melting Temperature (DSC)		°F	ISO 3146
Additional Information
Mass Per Unit Area, Azdel Test Method: 4.500 kg/m² Thickness, Azdel Test Method: 4.4 mm Density, ISO 1183 Test Method: 1.02 g/cm³ Density, ISO 1183 Test Method, Molded Plaque: 1.06 g/cm³ Recrystallizing Temperature, ISO 3146 Test Method: 115 °C CTLE, Azdel Test Method, -30°C to 0°C, 3mm: 5.2e-5 1/°C CTLE, Azdel Test Method, 0°C to 120°C, 3mm: 3.8e-5 1/°C Blank Heat Parameters -Internal Temperature: 190 to 215°C -Surface Temperature: 205 to 220°C -Typical Heating Time for IR-System: 180 to 240°C -Typical Heating Time for Hot Air System: 240 to 480°C Mould Temperature: 30 to 90°C Moulding Preasure: 150 to 250 bar Minimum Pressing Speed: 20 mm/sec Total Cycle Time: 30 to 90 sec
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AZDEL* C200B01N, AZDEL C200B01N, AZDEL* , AZDEL, AZDELC200B01N, C 200 B 01 N, C200B01N, C200, 200B, B01, 01N, Polypropylene Alloy, PP Alloy, Polypropylene, PP, PolypropyleneAlloy, PPAlloy, 200C
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI.

Notes

¹Typical properties: these are not to be construed as specifications.

AZDEL* C200B01N

Polypropylene Alloy

Long Glass Fiber, 20%

Supplied by Azdel, Inc.