IDES Prospector Already have an account? Login Here

IDES

AZDEL* U421-B01 (Transverse)

Polypropylene Alloy

Supplied by Azdel, Inc.

The technical datasheet with complete property values for AZDEL* U421-B01 (Transverse) is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Automotive Specifications 
Appearance 
  • Black
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Flammability
Nominal Value
Unit
Test Method
Burning Rate
in/min
 ISO 3795
Additional Information
Filler Content by Weight, Internal Test Method, Ashing: 42%
Sheet Thickness, Internal Test Method: 3.9 mm
Basis Weight, Internal Test Method, Mass per unit area: 4.7 kg/m²
Multi-axial Impact, ASTM D3763 Test Method, 4mm, Max Load: 700kg
Specific Gravity, ASTM D792 Test Method, Laminate: 1.21 sp gr 23/23°C
Specific Gravity, ASTM D792 Test Method, Molded: 1.21 sp gr 23/23°C
Coefficient of Thermal Expansion, ASTM E831 Test Method, -40 to 120°C ( -40 to 250°F): 37 ppm/°C
Notched Izod Impact Strength, ISO 180 Test Method, 23°C, 4.0mm: 720 J/m
Poission's Ratio, ISO 527 Test Method: 0.361
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AZDEL* U421-B01, AZDEL U421 B01, AZDEL* U421-B01 (Transverse), AZDEL U421B01 Transverse, AZDEL* , AZDEL, AZDELU421B01Transverse, U 421 B 01, U 421, U421B01, U421-B01, U421 B01, U 421 B 01 Transverse, U421-B01 (Transverse), U421B01 Transverse, U421:B01 (Transverse), U421:B01, U421/B01 (Transverse), U421/B01, U421+B01 (Transverse), U421+B01, U421_B01 (Transverse), U421_B01, U421 B01 (Transverse), U421, 421B, B01, 01Transverse, U421B01Transverse, U421_B01 Transverse, U421 B01 Transverse, U421_B01Transverse, Polypropylene Alloy, PP Alloy, Polypropylene, PP, PolypropyleneAlloy, PPAlloy, 421U
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.