|
0.157 in, Energy to Peak Force
|
|
ft·lb
|
|
|
0.157 in, Total Penetration Energy
|
|
ft·lb
|
|
|
Mass Per Unit Area, Azdel Test Method: 4.050 kg/m²
Thickness, Azdel Test Method: 3.9 mm
Density, ISO 1183 Test Method: 1.04 g/cm³
Density, ISO 1183 Test Method, Molded Plaque: 1.07 g/cm³
Recrystallizing Temperature, ISO 3146 Test Method: 115 °C
CTLE, Azdel Test Method, -30°C to 0°C, 3mm: 5.2e-5 1/°C
CTLE, Azdel Test Method, 0°C to 120°C, 3mm: 3.8e-5 1/°C
Blank Heat Parameters
-Internal Temperature: 190 to 215°C
-Surface Temperature: 205 to 220°C
-Typical Heating Time for IR-System: 180 to 240°C
-Typical Heating Time for Hot Air System: 240 to 480°C
Mould Temperature: 30 to 90°C
Moulding Preasure: 150 to 250 bar
Minimum Pressing Speed: 20 mm/sec
Total Cycle Time: 30 to 90 sec
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: AZDEL* C220B02N, AZDEL C220B02N, AZDEL* , AZDEL, AZDELC220B02N, C 220 B 02 N, C220B02N, C220, 220B, B02, 02N, Polypropylene Alloy, PP Alloy, Polypropylene, PP, PolypropyleneAlloy, PPAlloy, 220C
|