AZDEL C300B04N Azdel Polypropylene Alloy (Long Glass Fiber, 30%)

Product Description
Azdel® C300B04N is a chopped fiber material based on random oriented long chopped glass fiber mat (paper making process). This polypropylene composite material features high flow properties and a very homogeneous fiber distribution. This material is typically used for standard semi-structural, thin walled applications.
General
Material Status	Commercial: Active
Availability	Europe
Filler / Reinforcement	Long Glass Fiber, 30% Filler by Weight
Features	High Flow
Uses	Laminates
Forms	Sheet
Processing Method	Compression Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage		%	ISO 294-4
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Unnotched Impact Strength		ft·lb/in²	ISO 179/2fnU
Multi-Axial Instrumented Impact Energy			ISO 6603-2
0.157 in, Energy to Peak Force		ft·lb
0.157 in, Total Penetration Energy		ft·lb
Multi-Axial Instrumented Impact Peak Force (0.157 in)		lbf	ISO 6603-2
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Melting Temperature (DSC)		°F	ISO 3146
Additional Information
Mass Per Unit Area, Azdel Test Method: 4.310 kg/m² Thickness, Azdel Test Method: 3.9 mm Density, ISO 1183 Test Method: 1.11 g/cm³ Density, ISO 1183 Test Method, Molded Plaque: 1.14 g/cm³ Recrystallizing Temperature, ISO 3146 Test Method: 115 °C CTLE, Azdel Test Method, -30°C to 0°C, 3mm: 4.8e-5 1/°C CTLE, Azdel Test Method, 0°C to 120°C, 3mm: 3.6e-5 1/°C Blank Heat Parameters -Internal Temperature: 190 to 215°C -Surface Temperature: 205 to 220°C -Typical Heating Time for IR-System: 180 to 240°C -Typical Heating Time for Hot Air System: 240 to 480°C Mould Temperature: 30 to 90°C Moulding Preasure: 150 to 250 bar Minimum Pressing Speed: 20 mm/sec Total Cycle Time: 30 to 90 sec
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AZDEL* C300B04N, AZDEL C300B04N, AZDEL* , AZDEL, AZDELC300B04N, C 300 B 04 N, C300B04N, C300, 300B, B04, 04N, Polypropylene Alloy, PP Alloy, Polypropylene, PP, PolypropyleneAlloy, PPAlloy, 300C
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI.

Notes

¹Typical properties: these are not to be construed as specifications.

AZDEL* C300B04N

Polypropylene Alloy

Long Glass Fiber, 30%

Supplied by Azdel, Inc.