|
0.157 in, Energy to Peak Force
|
|
ft·lb
|
|
|
0.157 in, Total Penetration Energy
|
|
ft·lb
|
|
|
Mass Per Unit Area, Azdel Test Method: 4.300 kg/m²
Thickness, Azdel Test Method: 3.9 mm
Density, ISO 1183 Test Method: 1.10 g/cm³
Density, ISO 1183 Test Method, Molded Plaque: 1.14 g/cm³
Recrystallizing Temperature, ISO 3146 Test Method: 114 °C
CTLE, Azdel Test Method, -30°C to 0°C, 3mm: 4.3e-5 1/°C
CTLE, Azdel Test Method, 0°C to 120°C, 3mm: 3.3e-5 1/°C
Blank Heat Parameters
-Internal Temperature: 190 to 215°C
-Surface Temperature: 205 to 220°C
-Typical Heating Time for IR-System: 180 to 240°C
-Typical Heating Time for Hot Air System: 240 to 480°C
Mould Temperature: 30 to 90°C
Moulding Preasure: 150 to 250 bar
Minimum Pressing Speed: 20 mm/sec
Total Cycle Time: 30 to 90 sec
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: AZDEL* R301B01N, AZDEL R301B01N, AZDEL* , AZDEL, AZDELR301B01N, R 301 B 01 N, R301B01N, R301, 301B, B01, 01N, Polypropylene Alloy, PP Alloy, Polypropylene, PP, PolypropyleneAlloy, PPAlloy, 301R
|