AZDEL U421B02N (Transverse) Azdel Polypropylene Alloy (Glass Fiber Reinforcement, 42%)

Product Description
Azdel® U421B02N is a uni-directional fiber and random glass mat reinforced polypropylene composite featuring excellent fiber distribution over long flow paths and complex part forms. This material allows highly directionalised reinforcement in applications where major loads are in defined planes. The material can be combined with Azdel random mat products to reinforce localized high stress paths, minimizing both part weight and costs.
General
Material Status	Commercial: Active
Availability	Europe
Filler / Reinforcement	Glass Fiber Reinforcement, 42% Filler by Weight
Uses	Laminates
Forms	Sheet
Processing Method	Compression Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage		%	ISO 294-4
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Unnotched Impact Strength		ft·lb/in²	ISO 179/2fnU
Multi-Axial Instrumented Impact Energy			ISO 6603-2
0.157 in, Energy to Peak Force		ft·lb
0.157 in, Total Penetration Energy		ft·lb
Multi-Axial Instrumented Impact Peak Force (0.157 in)		lbf	ISO 6603-2
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Melting Temperature (DSC)		°F	ISO 3146
Additional Information
Mass Per Unit Area, Azdel Test Method: 4.840 kg/m² Thickness, Azdel Test Method: 3.9 mm Density, ISO 1183 Test Method: 1.21 g/cm³ Density, ISO 1183 Test Method, Molded Plaque: 1.25 g/cm³ Recrystallizing Temperature, ISO 3146 Test Method: 119 °C CTLE, Azdel Test Method, -30°C to 0°C, 3mm: 5.0e-5 1/°C CTLE, Azdel Test Method, 0°C to 120°C, 3mm: 3.3e-5 1/°C Blank Heat Parameters -Internal Temperature: 190 to 215°C -Surface Temperature: 205 to 220°C -Typical Heating Time for IR-System: 180 to 240°C -Typical Heating Time for Hot Air System: 240 to 480°C Mould Temperature: 30 to 90°C Moulding Preasure: 150 to 250 bar Minimum Pressing Speed: 20 mm/sec Total Cycle Time: 30 to 90 sec
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AZDEL* U421B02N, AZDEL U421B02N, AZDEL* U421B02N (Transverse), AZDEL U421B02N Transverse, AZDEL* , AZDEL, AZDELU421B02NTransverse, U 421 B 02 N, U421B02N, U 421 B 02 N Transverse, U421B02N (Transverse), U421B02N Transverse, U421, 421B, B02, 02N, NTransverse, U421B02NTransverse, Polypropylene Alloy, PP Alloy, Polypropylene, PP, PolypropyleneAlloy, PPAlloy, 421U

Notes

¹Typical properties: these are not to be construed as specifications.

AZDEL* U421B02N (Transverse)

Polypropylene Alloy

Glass Fiber Reinforcement, 42%

Supplied by Azdel, Inc.