|
Density
|
|
g/cm³
|
ASTM D1505 |
|
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
|
|
g/10 min
|
ASTM D1238 |
|
Coefficient of Friction (Cast Film)
|
|
|
ASTM D1894 |
|
Film Thickness - Tested
|
|
mil
|
|
|
Secant Modulus
|
|
|
ASTM D882 |
|
1% Secant, MD: 1.3 mil, Cast Film
|
|
psi
|
|
|
1% Secant, TD: 1.3 mil, Cast Film
|
|
psi
|
|
|
Tensile Strength
|
|
|
ASTM D882 |
|
MD: Break, 1.3 mil, Cast Film
|
|
psi
|
|
|
TD: Break, 1.3 mil, Cast Film
|
|
psi
|
|
|
Tensile Elongation
|
|
|
ASTM D882 |
|
MD: Break, 1.3 mil, Cast Film
|
|
%
|
|
|
TD: Break, 1.3 mil, Cast Film
|
|
%
|
|
|
Dart Drop Test - Cast Film (1.3 mil)
|
|
lbf/in
|
ASTM D1709 |
|
Elmendorf Tear Strength 2
|
|
|
ASTM D1922 |
|
MD: 1.3 mil
|
|
lbf/in
|
|
|
TD: 1.3 mil
|
|
lbf/in
|
|
|
Gloss (60°, 1.25 mil, Cast Film)
|
|
|
ASTM D2457 |
|
Haze (1.25 mil, Cast Film)
|
|
%
|
ASTM D1003 |
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: MarFlex® 7235, MarFlex 7235, MarFlex® , MarFlex, MarFlex7235, 7235, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, CP Chem, PolyethyleneLinearLowDensity
|
|
Features may also be described by the following terms: Good Processability, Easy Processing, Good Drawdown, Good draw down, Hexene Comonomer, Good Stiffness, Good Toughness, Tough.
|
|
Uses may also be described by the following terms: Food Wrap.
|