|
Density
|
|
g/cm³
|
ASTM D1505 |
|
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
|
|
g/10 min
|
ASTM D1238 |
|
Coefficient of Friction
|
|
|
ASTM D1894 |
|
Film Thickness - Tested
|
|
mil
|
|
|
Secant Modulus
|
|
|
ASTM D882 |
|
1% Secant, MD: 1.0 mil, Blown Film
|
|
psi
|
|
|
1% Secant, TD: 1.0 mil, Blown Film
|
|
psi
|
|
|
Tensile Strength
|
|
|
ASTM D882 |
|
MD: Break, 1.0 mil, Blown Film
|
|
psi
|
|
|
TD: Break, 1.0 mil, Blown Film
|
|
psi
|
|
|
Tensile Elongation
|
|
|
ASTM D882 |
|
MD: Break, 1.0 mil, Blown Film
|
|
%
|
|
|
TD: Break, 1.0 mil, Blown Film
|
|
%
|
|
|
Dart Drop Test - Blown Film (1.0 mil)
|
|
lbf/in
|
ASTM D1709 |
|
Elmendorf Tear Strength 2
|
|
|
ASTM D1922 |
|
MD: 1.0 mil
|
|
lbf/in
|
|
|
TD: 1.0 mil
|
|
lbf/in
|
|
|
Gloss (60°, 1.00 mil, Blown Film)
|
|
|
ASTM D2457 |
|
Haze (1.00 mil, Blown Film)
|
|
%
|
ASTM D1003 |
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: MarFlex® 7109DL, MarFlex 7109DL, MarFlex® , MarFlex, MarFlex7109DL, 7109 DL, 7109DL, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, CP Chem, PolyethyleneLinearLowDensity, DL7109
|
|
Features may also be described by the following terms: Good Stiffness, Good Processability, Easy Processing, Good Drawdown, Good draw down, Hexene Comonomer, High Antiblocking, High Antiblock.
|
|
Uses may also be described by the following terms: Stretch Wrap.
|