ICORENE 3560 S1 ICO Polymers Polyethylene, Linear Medium Density

Product Description

ICORENE® 3560 S1 is a compounded linear medium density polyethylene copolymer developed for rotational molding applications. It exhibits a balance of stiffness, toughness with good processing characteristics. Intended applications are tanks and a wide variety of general purpose products. The resin is fully heat and UV stabilized. Base resin is FDA approved.

General

Material Status

Commercial: Active

Availability

North America

Additive

Heat Stabilizer

UV Stabilizer

Features

General Purpose

Good Moldability

Good Processability

Good Stiffness

Good Toughness

Good UV Resistance

Heat Stabilized

High ESCR (Stress Crack Resist.)

Uses

General Purpose

Industrial Tanks

Agency Ratings

Appearance

Black

Colors Available

Forms

Powder

Processing Method

Rotational Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal)		hr	ASTM D1693
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield		psi
Break		psi
Tensile Elongation (Yield)		%	ASTM D638
Flexural Modulus - 1% Secant		psi	ASTM D790
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)			ASTM D2240
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ICORENE® 3560 S1, ICORENE 3560 S1, ICORENE® , ICORENE, ICORENE3560S1, 3560 S 1, 3560 S1, 3560S, S1, 3560S1, Polyethylene, Linear Medium Density, Polyethylene Linear Medium Density, LMDPE, Polyethylene, PE, ICO Polymers, PolyethyleneLinearMediumDensity, S3560
Features
Features may also be described by the following terms: Good Moldability, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Good Toughness, Tough, Good Stiffness, Good Processability, Easy Processing, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Uses may also be described by the following terms: Industrial Tanks.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).

Notes

¹Typical properties: these are not to be construed as specifications.

ICORENE® 3560 S1

Linear Medium Density Polyethylene

Supplied by ICO Polymers, Inc.