IDES Prospector Already have an account? Login Here

IDES

TAROMID A 280 H G6 X0

Polyamide 66

Glass Fiber Reinforcement, 30%

Supplied by Taro Plast S.p.A.

The technical datasheet with complete property values for TAROMID A 280 H G6 X0 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Polyamide 66 medium viscosity, 30% glass fiber reinforced, UL94 V0 self extinguishing, heat stabilized, very good flame proofing also at low thickness. High mechanical and thermal properties, low shrinkage and high dimensional stability, high tracking resistance. Material PBDE/PBDF free.

UL94 V0 approved - All color at 0,88 mm - NC,BK, thickness 0,75 mm - UL 746B approved - CTI UL94 class 1.

Available: different colors, release agent (W).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Additive 
  • Heat Stabilizer
  • Mold Release
  
Features 
  • Flame Retardant
  • Good Dimensional Stability
  • Good Mold Release
  • Heat Stabilized
  • Low Shrinkage
  • Medium Viscosity
  • Self Extinguishing
  • Tracking Resistant
Appearance 
  • Colors Available
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Molding Shrinkage
     ASTM D955
Flow: 0.126 in
in/in
  
Across Flow: 0.126 in
in/in
  
Water Absorption
     ASTM D570, ISO 62
73°F, 24 hr
%
  
Saturation, 73°F
%
  
Granule Humidity
%
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638, ISO 527-2
Tensile Strength (Break)
psi
 ASTM D638, ISO 527-2
Tensile Elongation (Break)
%
 ASTM D638, ISO 527-2
Flexural Modulus
psi
 ASTM D790, ISO 178
Flexural Strength
      
--
psi
 ISO 178
Break
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 2 (73°F)
ft·lb/in²
 ASTM D256, ISO 179
Notched Izod Impact (73°F, 0.126 in)
ft·lb/in
 ISO 180, ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
264 psi, Unannealed, 0.126 in
°F
 ASTM D648
264 psi, Unannealed
°F
 ISO 75-2/A
Max. Continuous Use Temperature
      
-- 3
°F
 UL 746B
-- 4
°F
 UL 746B
-- 5
°F
 UL 746B
-- 6
°F
 UL 746B
-- 7
°F
 UL 746B
-- 8
°F
 IEC 60216
Vicat Softening Temperature
°F
 ISO 306/B50, ASTM D1525 9
Ball Pressure Test (401°F)
 
 VDE 0470
Melting Temperature
°F
 ASTM D211, ISO 121
CLTE - Flow (-22 to 86°F)
in/in/°F
 ASTM D696
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength (0.0787 in)
V/mil
 ASTM D149
Comparative Tracking Index (Solution A)
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0295 in, Natural, Black
 
  
0.0346 in, All Colors
 
  
Glow Wire Flammability Index (0.0472 in)
°F
 IEC 60695-2-12
Glow Wire Ignition Temperature (0.0472 in)
°F
 IEC 60695-2-13
Oxygen Index
%
 ASTM D2863
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TAROMID A 280 H G6 X0, TAROMID A , TAROMIDA280HG6X0, TAROMIDA, A 280 H G 6 X 0, A280 H G6 X0, A280, 280 H G 6 X 0, A280HG6X0, 280 H G6 X0, 280H, HG, G6, 6X, X0, 280HG6X0, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Taro Plast, Polyamide66, Nylon66, H280, 280A
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: Medium Viscosity, Low Shrinkage, Self Extinguishing, Self-Extinguishing, Good Dimensional Stability, Dimensionally Stable, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Mold Release, Easy Release, Good Demolding.
Injection
Nominal Value
Unit
 
Drying Temperature
      
--
°F
  
Pre-heater
°F
  
Drying Time
      
--
hr
  
Pre-heater
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
26x4x50 mm
3M. with imp.0,75 mm
4M. with imp. 3 mm
5E. 0,75 mm
6M. w/o imp. 3 mm
7M. w/o imp.0,75 mm
8Short Term
9Rate B (120°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.