IDES Prospector Already have an account? Login Here

IDES

TAROLOY 50 Z1

Polycarbonate + PBT

Supplied by Taro Plast S.p.A.

The technical datasheet with complete property values for TAROLOY 50 Z1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Impact Modifier (50000 ppm)
Features 
  • Good Chemical Resistance
  • Good Dimensional Stability
  • Good Impact Resistance
  • Impact Modified
  • Low Temperature Impact Resistance
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (260°C/5.0 kg)
g/10 min
 ISO 1133
Molding Shrinkage
     ASTM D955
Flow: 0.126 in
in/in
  
Across Flow: 0.126 in
in/in
  
Water Absorption
     ISO 62
73°F, 24 hr
%
  
Saturation, 73°F
%
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.126 in)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525 2
Electrical
Nominal Value
Unit
Test Method
Dielectric Strength
V/mil
 ASTM D149
Comparative Tracking Index
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Glow Wire Ignition Temperature (0.0787 in)
°F
 IEC 60695-2-13
Additional Information
CTI, IEC 60112, Method A: 200 V
Notched Izod, ISO 180, -20°C: 500 J/m
Notched Izod, ISO 180, 23°C: 900 J/m
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TAROLOY 50 Z1, TAROLOY , TAROLOY50Z1, 50 Z 1, 50 Z1, 50Z, Z1, 50Z1, Polycarbonate + PBT, Polycarbonate PBT, Polycarbonate : PBT, Polycarbonate / PBT, Polycarbonate - PBT, Polycarbonate _ PBT, Polycarbonate PBT, PC+PBT, PCPBT, PC:PBT, PC/PBT, PC-PBT, PC_PBT, PC PBT, Polycarbonate, PC, Taro Plast, PolycarbonatePBT, Polycarbonate_PBT, Z50
Features
Features may also be described by the following terms: Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Impact Resistance, Good Dimensional Stability, Dimensionally Stable, Good Chemical Resistance, Chemical Resistant.
Notes
1Typical properties: these are not to be construed as specifications.
2Rate A (50°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.