IDES Prospector Already have an account? Login Here

IDES

PEARLTHANE® 11T75D

Thermoplastic Polyurethane Elastomer (Polycaprolactone)

Supplied by Merquinsa

The technical datasheet with complete property values for PEARLTHANE® 11T75D is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PEARLTHANE® 11T75D is a polycaprolactone copolyester based TPU, supplied in form of translucent, colorless pellets, with extremely hardness. It is especially advisable for use in producing technical parts by injection molding.

PEARLTHANE® 11T75D can be used for injection molding of a variety of technical parts. It can also be applied as base resin for extremely tough (glass reinforced) engineering compounds.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Good Toughness
  • High Hardness
  
Uses 
  • Engineering Parts
Agency Ratings 
Appearance 
  • Translucent
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 DIN 53479
Moisture Content
%
 Internal Method
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength
      
Yield
psi
 ASTM D412
Yield
psi
 DIN 53504
Tear Strength
      
-- 2
lbf/in
 ASTM D624
--
lbf/in
 DIN 53515
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240, DIN 53505
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
 Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PEARLTHANE® 11T75D, PEARLTHANE 11T75D, PEARLTHANE® , PEARLTHANE, PEARLTHANE11T75D, 11 T 75 D, 11T75D, 11T, T75, 75D, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polycaprolactone), Thermoplastic Polyurethane Elastomer Polycaprolactone, TPU-Capro, TPUCapro, TPU:Capro, TPU/Capro, TPU+Capro, TPU_Capro, TPU Capro, Thermoplastic Polyurethane, TPU, Merquinsa, ThermoplasticPolyurethaneElastomerPolycaprolactone, ThermoplasticPolyurethane, T11
Features
Features may also be described by the following terms: High Hardness, Hard, Good Toughness, Tough.
Uses
Uses may also be described by the following terms: Engineering Parts.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Holding Pressure
psi
  
Screw Speed
rpm
  
Screw L/D Ratio
 
  
Injection Notes
Injection Cooling Time: 40sec
Injection Holding Time: 10sec
Injection Time: 4.6sec
Closing force: : 30 tons
Screw diameter: : 1.02 in
Maximum hydraulic pressure: : 3050 psi.
Mould Plaque 4.7x4.7x0.08 in.
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.