IDES Prospector Already have an account? Login Here

IDES

EMERGE™ ABS 5302

Advanced Resin

Glass Fiber Reinforcement, 20%

Supplied by Styron LLC

The technical datasheet with complete property values for EMERGE™ ABS 5302 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
EMERGE ABS 5302 is a black, 20% glass filled ABS which is suitable for use in a wide variety of internal structural component applications in the Information Technology market. This resin exhibits a property balance of flow, rigidity, and dimensional stability.

Applications:
  • Information Technology Equipment and consumer electronics
  • Printer internal components
  • Structural frames
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 20% Filler by Weight
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
     ASTM D1238
220°C/10.0 kg
g/10 min
  
230°C/3.8 kg
g/10 min
  
Molding Shrinkage
     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield, 0.126 in, Injection Molded
psi
  
Break, 0.126 in, Injection Molded
psi
  
Tensile Elongation
     ASTM D638
Yield, 0.126 in, Injection Molded
%
  
Break, 0.126 in, Injection Molded
%
  
Flexural Modulus (0.126 in, Injection Molded)
psi
 ASTM D790
Flexural Strength (0.126 in, Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.126 in, Injection Molded)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Vicat Softening Temperature
      
--
°F
 ASTM D1525 2
--
°F
 ASTM D1525 3
CLTE
     ASTM D696
Flow: -22 to 85°F
in/in/°F
  
Transverse: -22 to 85°F
in/in/°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL 4 (0.0394 in, BK, NC, GY)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: EMERGE™ ABS 5302, EMERGE ABS 5302, EMERGE™ , EMERGE, EMERGEABS5302, ABS 5302, ABS5302, Acrylonitrile Butadiene Styrene, ABS, Styron, AcrylonitrileButadieneStyrene, 5302ABS
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Rate A (50°C/h), Loading 2 (50 N)
3Rate B (120°C/h), Loading 1 (10 N)
4This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.