IDES Prospector Already have an account? Login Here

IDES

MAGNUM™ 375 HP

ABS Resin

Supplied by Styron LLC

The technical datasheet with complete property values for MAGNUM™ 375 HP is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
High Heat, Low Gloss, Medium Impact ABS resin for injection molded automotive interior trim applications.

Applications
  • Chrysler-MSDB-300, MSDB-191
  • Ford-WSB-M4D690-A
  • GM- GMP.ABS.009
General  
Material Status 
  • Commercial: Active
Availability 
  • Latin America
  • North America
  
Automotive Specifications 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183/B
Apparent Density
g/cm³
 ASTM D1895
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)
g/10 min
 ASTM D1238, ISO 1133
Molding Shrinkage
     ISO 294-4
Across Flow
%
  
Flow
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 2
psi
 ASTM D638
--
psi
 ISO 527-2
Tensile Strength
      
Yield 2
psi
 ASTM D638
Yield
psi
 ISO 527-2/50
Tensile Elongation
      
Yield 2
%
 ASTM D638
Yield
%
 ISO 527-2/50
Break 2
%
 ASTM D638
Break
%
 ISO 527-2/50
Flexural Modulus
      
-- 3
psi
 ASTM D790
-- 4, 5
psi
 ISO 178
Flexural Strength
      
-- 3
psi
 ASTM D790
-- 4, 6
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact
      
-22°F
ft·lb/in
 ASTM D256
73°F
ft·lb/in
 ASTM D256
-22°F
ft·lb/in²
 ISO 180/A
73°F
ft·lb/in²
 ISO 180/A
Instrumented Dart Impact
     ASTM D3763
-22°F, Peak Energy
in·lb
  
73°F, Peak Energy
in·lb
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed
°F
 ASTM D648
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ASTM D648
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50, ASTM D1525 7
CLTE
     ASTM E831
Flow: -40 to 212°F
in/in/°F
  
Transverse: -40 to 212°F
in/in/°F
  
Flammability
Nominal Value
Unit
Test Method
FMVSS Flammability 8
in/min
 FMVSS 302
Additional Information
Tests conducted on 0.125 inch (3.2 mm) injection molded specimen, unannealed, unless noted.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: MAGNUM™ 375 HP, MAGNUM 375 HP, MAGNUM™ , MAGNUM, MAGNUM375HP, 375 HP, 375HP, Acrylonitrile Butadiene Styrene, ABS, Styron, AcrylonitrileButadieneStyrene, HP375
Automotive Specifications
This plastic material has approval for 3 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (1), CHRYSLER (1), GM (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
3Method I (3 point load), 0.051 in/min
40.079 in/min
53-points
63-point
7Rate A (50°C/h), Loading 2 (50 N)
8This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.