IDES Prospector Already have an account? Login Here

IDES

EMERGE™ PC/ABS 7600

Advanced Resin

Supplied by Styron LLC

The technical datasheet with complete property values for EMERGE™ PC/ABS 7600 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
EMERGE™ PC/ABS 7600 is an ignition-resistant PC/ABS blend that contains no chlorine or bromine additives. It combines the superior physical properties of PC & the excellent processability of ABS, resulting in high toughness and high flow. This resin is suitable for use in a wide range of applications. EMERGE PC/ABS 7600 Natural has undergone biocompatibility testing based on ISO 10993 (Parts 5 & 10) and is suitable for use in medical equipment housings.

Main Characteristics:
  • Ignition-Resistant
  • Chlorine and Bromine Free
  • ISO 10993 (Parts 5 & 10)

Applications:
  • Medical equipment housings
  • Information technology equipment
  • Consumer electronics
  • Office and business equipment
  • Retail sales equipment
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Latin America
  • North America
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0.126 in, Injection Molded)
psi
 ASTM D638
Tensile Strength
     ASTM D638
Yield, 0.126 in, Injection Molded
psi
  
Break, 0.126 in, Injection Molded
psi
  
Tensile Elongation
     ASTM D638
Yield, 0.126 in, Injection Molded
%
  
Break, 0.126 in, Injection Molded
%
  
Flexural Modulus (0.126 in, Injection Molded)
psi
 ASTM D790
Flexural Strength (0.126 in, Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.126 in, Injection Molded)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale, 0.126 in, Injection Molded)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 2
Ball Indentation Temperature
°F
 IEC 60335-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL 3
     UL 94
0.0591 in
 
  
0.0787 in
 
  
Glow Wire Flammability Index 3 (0.0787 in)
°F
 IEC 60695-2-12
Glow Wire Ignition Temperature 3 (0.0787 in)
°F
 IEC 60695-2-13
Oxygen Index 3
%
 ASTM D2863
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: EMERGE™ PC/ABS 7600, EMERGE PCABS 7600, EMERGE™ , EMERGE, EMERGEPCABS7600, PC, PC/ABS 7600, PCABS 7600, PC:ABS 7600, PC+ABS 7600, PC-ABS 7600, PC_ABS 7600, PC ABS 7600, PCABS, ABS7600, PCABS7600, PC_ABS7600, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Styron, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, ABSPC
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Melt Temperature (Aim)
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Rate B (120°C/h), Loading 1 (10 N)
3This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.