IDES Prospector Already have an account? Login Here

IDES

EMERGE™ PC/ABS 7570

Advanced Resin

Supplied by Styron LLC

The technical datasheet with complete property values for EMERGE™ PC/ABS 7570 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
EMERGE™ PC/ABS 7570 Advanced Resin is a high flow, ignition-resistant PC/ABS blend that contains no chlorinated or brominated additives. Its superior processing makes it ideal for injection molding of large, thin-wall, or intricate parts. EMERGE PC/ABS 7570 is suitable for use in a wide variety of applications in the Information Technology Equipment & Consumer Electronics industries.

Applications:
  • LCD TV Enclosures
  • CRT TV Enclosures
  • Monitor and PC Enclosures
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  
Additive 
  • Flame Retardant
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/B
Apparent Density
g/cm³
 ISO 60
Melt Mass-Flow Rate (MFR)
     ISO 1133
230°C/3.8 kg
g/10 min
  
260°C/5.0 kg
g/10 min
  
Molding Shrinkage - Flow
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0.157 in, Injection Molded)
psi
 ISO 527-2/1
Tensile Stress
     ISO 527-2/50
Yield, 0.157 in, Injection Molded
psi
  
Break, 0.157 in, Injection Molded
psi
  
Tensile Strain
     ISO 527-2/50
Yield, 0.157 in, Injection Molded
%
  
Break, 0.157 in, Injection Molded
%
  
Flexural Modulus 2 (0.157 in, Injection Molded)
psi
 ISO 178
Flexural Strength 2 (0.157 in, Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
      
--
°F
 ISO 306/A120
--
°F
 ISO 306/B50
Ball Indentation Temperature
°F
 IEC 60335-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL 3
     UL 94
0.0630 in, All Colors
 
  
0.0984 in, Natural plus Color Concentrate
 
  
Glow Wire Flammability Index 3 (0.0787 in)
°F
 IEC 60695-2-12
Glow Wire Ignition Temperature 3 (0.0787 in)
°F
 IEC 60695-2-13
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: EMERGE™ PC/ABS 7570, EMERGE PCABS 7570, EMERGE™ , EMERGE, EMERGEPCABS7570, PC, PC/ABS 7570, PCABS 7570, PC:ABS 7570, PC+ABS 7570, PC-ABS 7570, PC_ABS 7570, PC ABS 7570, PCABS, ABS7570, PCABS7570, PC_ABS7570, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Styron, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, ABSPC
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
3This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.