IDES Prospector Already have an account? Login Here

IDES

Adsyl 7372 XCP

Polyolefin

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Adsyl 7372 XCP is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
"Adsyl" 7372 XCP is an advanced polyolefin, specially designed for use as a sealing layer in coextruded film applications. This grade features a very low seal initiation temperature and a low flow. It contains anti-block additives.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antiblock
Features 
  • Antiblocking
  • Food Contact Acceptable
  • Good Heat Seal
  • High Shrinkage
  • Low Flow
  • Low Temperature Heat Sealability
Uses 
  • Film
  • Shrink Wrap
  
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Coextruded Film
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Films
Nominal Value
Unit
Test Method
Seal Initiation Temperature
°F
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A50
Melting Temperature
°F
 DSC
Optical
Nominal Value
Unit
Test Method
Haze     ASTM D1003
0.591 mil
%
  
0.787 mil
%
  
Additional Information
Free shrinkage, ASTM D2732, coextruded shrink film, 120°C, MD: 52%
Free shrinkage, ASTM D2732, coextruded shrink film, 120°C, TD: 57%
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Adsyl 7372 XCP, Adsyl , Adsyl7372XCP, 7372 XCP, 7372XCP, Polyolefin, Unspecified, Polyolefin Unspecified, Polyolefin, LyondellBasell, PolyolefinUnspecified, XCP7372
Features
Features may also be described by the following terms: Antiblocking, Unspecified Antiblock, Good Heat Seal, Low Flow, Low Melt, Low MFI, High Shrinkage, Low Temperature Heat Sealability, Low Temperature Heat Seal.
Uses
Uses may also be described by the following terms: Shrink Wrap.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.