IDES Prospector Already have an account? Login Here

IDES

ALCOM® POM 770/1 PTFE15

Acetal (POM) Copolymer

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALCOM® POM 770/1 PTFE15 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Additive 
  • PTFE Lubricant
Features 
  • Copolymer
  • Lubricated
  
Uses 
  • Bearings
  • Bushings
  • Gears
  • Rollers
  
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Yield)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Melting Temperature
°F
 DSC
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCOM® POM 770/1 PTFE15, ALCOM POM 7701 PTFE15, ALCOM® POM , ALCOM POM, ALCOMPOM7701PTFE15, ALCOMPOM, POM 770 1 PTFE 15, POM 770, 770, POM770/1 PTFE15, POM7701 PTFE15, POM770:1 PTFE15, POM770+1 PTFE15, POM770-1 PTFE15, POM770_1 PTFE15, POM770 1 PTFE15, POM770, 770 1 PTFE 15, POM7701PTFE15, 770/1 PTFE15, 7701 PTFE15, 770:1 PTFE15, 770+1 PTFE15, 770-1 PTFE15, 770_1 PTFE15, 770 1 PTFE15, 7701, 1PTFE, PTFE15, POM770_1PTFE15, 7701PTFE15, Acetal Copolymer, Acetal Copolymer, 770_1PTFE15, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, Albis Euro, AcetalPOMCopolymer, 1770, 770POM
Uses
Uses may also be described by the following terms: Rollers, Roller.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.