Delrin 100AL NC010 DuPont Acetal (POM) Homopolymer

Product Description

Delrin® 100AL NC010 an unreinforced, high viscosity, lubricated acetal homopolymer resin, containing an advanced system of lubrication for low wear and friction against metals and plastics.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

Additive

Lubricant

Features

Good Creep Resistance

Good Wear Resistance

High Impact Resistance

High Viscosity

Homopolymer

Low Friction

Lubricated

Ultrasonic Weldable

Uses

Conveyors

Engineering Parts

Gears

RoHS Compliance

Appearance

Natural Color

Processing Method

Extrusion

Injection Molding

Part Marking Code (ISO 11469)

>POM-S<

Resin ID (ISO 1043)

POM-S

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ISO 1133
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)		in³/10min	ISO 1133
Molding Shrinkage			ISO 294-4
Across Flow: 0.0787 in		%
Flow: 0.0787 in		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2
Tensile Stress (Yield, 73°F)		psi	ISO 527-2
Tensile Strain
Yield, 73°F		%	ISO 527-2
Break, 73°F		%	ISO 527-2/50
Nominal Tensile Strain at Break (73°F)		%	ISO 527-2
Flexural Modulus (73°F)		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F		ft·lb/in²
73°F		ft·lb/in²
Notched Izod Impact Strength (73°F)		ft·lb/in²	ISO 180/1A
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Melting Temperature²		°F	ISO 11357-3
CLTE			ISO 11359-2
Flow: -40 to 73°F		in/in/°F
Flow: 73 to 131°F		in/in/°F
Flow: 131 to 212°F		in/in/°F
Transverse: -40 to 73°F		in/in/°F
Transverse: 73 to 131°F		in/in/°F
Transverse: 131 to 212°F		in/in/°F
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0295 in
0.118 in
Flammability Classification			IEC 60695-11-10, -20
0.0295 in
0.118 in
UL	Nominal Value	Unit	Test Method
RTI Str			UL 746
0.0295 in		°F
0.118 in		°F
RTI Imp			UL 746
0.0295 in		°F
0.118 in		°F
RTI Elec			UL 746
0.0295 in		°F
0.118 in		°F
Related Terminology
This supplier and product may also be known by these terms: Derlin Product names can be difficult to match. You may have searched any one of these terms to find this product: Delrin® 100AL NC010, Delrin 100AL NC010, Delrin® , Delrin, Delrin100ALNC010, 100 AL NC 010, 100AL NC010, 100AL, ALNC, NC010, 100ALNC010, Acetal Homopolymer, Acetal Homopolymer, Acetal (POM) Homopolymer, Acetal POM Homopolymer, Acetal, pom, DuPont, AcetalPOMHomopolymer, AL100
Features
Features may also be described by the following terms: Good Wear Resistance, Wear Resistant, High Viscosity, Low Friction, Good Creep Resistance, Creep Resistant, High Impact Resistance, Ultrasonic Weldable.
Uses
Uses may also be described by the following terms: Engineering Parts.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Processing (Melt) Temp		°F
Melt Temperature, Optimum - Injection Molding		°F
Mold Temperature		°F
Mold Temperature, Optimum - Injection Molding		°F
Drying Recommended

Notes

¹Typical properties: these are not to be construed as specifications.

²10°C/min

Delrin® 100AL NC010

ACETAL RESIN

Supplied by DuPont Performance Polymers