Already have an account?
Login Here
IDES
Zenite® 7145L
Liquid Crystal Polymer
Glass Fiber Reinforcement, 45%
Supplied by Ticona
The technical datasheet with complete property values for Zenite® 7145L is available to members of the
Prospector Plastics Database
.
Register to view full datasheet
.
Register to View Full Datasheet
Product Description
Zenite® 7145L is a 45% glass fiber reinforced and lubricated liquid crystal polymer for injection molding. It has excellent impact resistance and high heat deflection temperature.
General
Material Status
Commercial: Active
Availability
Asia Pacific
Europe
North America
Filler / Reinforcement
Glass Fiber Reinforcement, 45% Filler by Weight
Additive
Lubricant
Features
Good Impact Resistance
Lubricated
RoHS Compliance
Forms
Pellets
Processing Method
Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Molding Shrinkage
ISO 294-4
Across Flow
%
Flow
%
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1A/1
Tensile Stress
(Break)
psi
ISO 527-2/1A/5
Tensile Strain
(Break)
%
ISO 527-2/1A/5
Flexural Modulus
(73°F)
psi
ISO 178
Flexural Strength
(73°F)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ISO 179/1eA
-22°F
ft·lb/in²
73°F
ft·lb/in²
Charpy Unnotched Impact Strength
ISO 179/1eU
-22°F
ft·lb/in²
73°F
ft·lb/in²
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
(264 psi, Unannealed)
°F
ISO 75-2/A
Melting Temperature
2
°F
ISO 11357-3
CLTE
ISO 11359-2
Flow
in/in/°F
Transverse
in/in/°F
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
IEC 60093
Volume Resistivity
ohm·cm
IEC 60093
Relative Permittivity
IEC 60250
100 Hz
1 MHz
Dissipation Factor
IEC 60250
100 Hz
1 MHz
Comparative Tracking Index
V
IEC 60112
Electric Strength
V/mil
IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
(0.0591 in)
UL 94
Oxygen Index
%
ISO 4589-2
Fill Analysis
Nominal Value
Unit
Test Method
Melt Density
g/cm³
Internal Method
Melt Specific Heat
Btu/lb/°F
ASTM C351
Melt Thermal Conductivity
Btu·in/hr/ft²/°F
Internal Method
Ejection Temperature
°F
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Zenite® 7145L, Zenite 7145L, Zenite® , Zenite, Zenite7145L, 7145 L, 7145L, Liquid Crystal Polymer, LCP, Ticona, LiquidCrystalPolymer, L7145
Features
Features may also be described by the following terms: Good Impact Resistance.
Injection
Nominal Value
Unit
Processing (Melt) Temp
°F
Mold Temperature
°F
Injection Notes
Melt Temperature Optimum: 365°C
Mold Temperature Optimum: 80°C
Notes
1
Typical properties: these are not to be construed as specifications.
2
10°C/min
Copyright © 2012
IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.