IDES Prospector Already have an account? Login Here

IDES

Celstran® PBT-GF30-08

Polybutylene Terephthalate

Long Glass Fiber, 30%

Supplied by Ticona

The technical datasheet with complete property values for Celstran® PBT-GF30-08 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
30% Long Glass Fiber Reinforced PBT
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Long Glass Fiber, 30% Filler by Weight
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A/1
Tensile Stress (Break)
psi
 ISO 527-2/1A/5
Tensile Strain (Break)
%
 ISO 527-2/1A/5
Flexural Modulus (73°F)
psi
 ISO 178
Flexural Strength (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Celstran® PBT-GF30-08, Celstran PBTGF3008, Celstran® , Celstran, CelstranPBTGF3008, PBT, PBT GF 30 08, PBT-GF30-08, PBTGF3008, PBT:GF30:08, PBT/GF30/08, PBT+GF30+08, PBT_GF30_08, PBT GF30 08, PBTGF, GF30, 3008, Polybutylene Terephthalate, Polyester, Ticona, PolybutyleneTerephthalate, GFPBT
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Notes
Celstran can be processed on a standard injection molding unit.
A general purpose metering screw is recommended with a zone distribution
of 40% feed, 40% transition, and 20% metering.
A free flowing check ring assembly is recommended.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.