IDES Prospector Already have an account? Login Here

IDES

LG PS 405AF

High Impact Polystyrene

Supplied by LG Chem Ltd.

The technical datasheet with complete property values for LG PS 405AF is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Flame retardant HIPS is generally used in the electric and electronic applications owing to its excellent material properties.The materials used in electric and electronic applications are required to have flammability to prevent fire caused by the occurance of electricity leakage . In addition, due to legislation regarding the use of flame retardant materials for fire safety, there has been a steadily increasing demand for flame retardant products.LG chemical's HIPS meet the requirements of UL, CSA and IEC and also LG chemical produces outstanding flame retardant HIPS through its advanced technology.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • South America
  
Features 
  • Flame Retardant
Uses 
  • Computer Components
  • Electrical/Electronic Applications
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
 ASTM D638
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus 3
psi
 ASTM D790
Flexural Strength 2 (Yield)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-22°F, 0.125 in
ft·lb/in
  
-22°F, 0.250 in
ft·lb/in
  
73°F, 0.125 in
ft·lb/in
  
73°F, 0.250 in
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.250 in
°F
  
66 psi, Annealed, 0.250 in
°F
  
264 psi, Unannealed, 0.250 in
°F
  
264 psi, Annealed, 0.250 in
°F
  
Vicat Softening Temperature
      
--
°F
 ASTM D1525 4
--
°F
 ASTM D1525 5
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0625 in
 
  
0.100 in
 
  
0.125 in
 
  
UL
Nominal Value
Unit
Test Method
Hot-wire Ignition (HWI) (PLC)
 
 UL 746
High Amp Arc Ignition (HAI) (PLC)
 
 UL 746
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: LG PS 405AF, LG PS , LGPS405AF, LGPS, PS 405 AF, PS405AF, PS405, PS, 405 AF, 405AF, Polystyrene, High Impact, Polystyrene High Impact, PS (HIPS), PS HIPS, Polystyrene, LG Chem, PolystyreneHighImpact, PSHIPS, AF405, 405PS
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Computer Components, Computer Parts.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Holding Pressure
psi
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.59 in/min
4Loading 1 (10 N)
5Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.