YUCLAIR® FH811U SK Corporation Polyethylene, Linear Low Density

Product Description

YUCLAIR FH811U is octene-1 copolymer designed for use in heavy duty bag application.
YUCLAIR FH811U provides stronger film than ones made from competitive LLDPE film grades. Therefore YUCLAIR FH811U shows superior tensile strength, tear strength, gel-free, stiffness, antiblock and sealibility. YUCLAIR FH811U can be processed readily into blown film using standard extrusion techniques.
YUCLAIR FH811U complies with FDA regulations in 21 CFR177.1520 for all food contact.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

Additive

Antiblock

Features

Antiblocking

Copolymer

Food Contact Acceptable

Good Stiffness

Good Tear Strength

High Tensile Strength

Octene Comonomer

Uses

Film

General Purpose

Heavy-duty Bags

Agency Ratings

Forms

Pellets

Processing Method

Blown Film

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Tensile Strength			ASTM D882
MD: Yield, 7.5 mil		psi
TD: Yield, 7.5 mil		psi
MD: Break, 7.5 mil		psi
TD: Break, 7.5 mil		psi
Tensile Elongation			ASTM D882
MD: Break, 7.5 mil		%
TD: Break, 7.5 mil		%
Elmendorf Tear Strength - MD (7.5 mil)		g	ASTM D1922
Spencer Impact (7.5 mil)		ft·lb	ASTM D3420
Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature		°F	ASTM D746
Vicat Softening Temperature		°F	ASTM D1525
Optical	Nominal Value	Unit	Test Method
Haze (7.48 mil)		%	ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: YUCLAIR® FH811U, YUCLAIR FH811U, YUCLAIR® , YUCLAIR, YUCLAIRFH811U, FH 811 U, FH811U, FH811, 811U, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, SK Corporation, PolyethyleneLinearLowDensity, 811FH
Features
Features may also be described by the following terms: Antiblocking, Unspecified Antiblock, High Tensile Strength, Good Tear Strength, Good Stiffness, Octene Comonomer.
Uses
Uses may also be described by the following terms: Heavy-duty Bags, Heavy Duty Bags.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).

Notes

¹Typical properties: these are not to be construed as specifications.

YUCLAIR® FH811U

Linear Low Density Polyethylene

Supplied by SK Corporation