YUCLAIR® FT860 SK Corporation Polyethylene, Linear Low Density

Product Description

YUCLAIR FT860 is octene-1 copolymer designed for use in stretch wrap and casting type packaging film application.
YUCLAIR FT860 provides stronger film than ones made from competitive LLDPE film grades. Therefore YUCLAIR FT860 shows superior stiffness, tensile strength, gel-free, and processibility.
YUCLAIR FT860 can be processed readily into casting film using standard extrusion techniques.
YUCLAIR FT860 complies with FDA regulations in 21 CFR177.1520 for all food contact.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

Features

Copolymer

Food Contact Acceptable

Good Processability

High Stiffness

High Tensile Strength

Uses

Cast Film

Stretch Wrap

Agency Ratings

Forms

Pellets

Processing Method

Cast Film

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Secant Modulus			ASTM D882
MD		psi
TD		psi
Tensile Strength			ASTM D882
MD: Yield		psi
TD: Yield		psi
MD: Break		psi
TD: Break		psi
Tensile Elongation			ASTM D882
MD: Break		%
TD: Break		%
Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature		°F	ASTM D746
Vicat Softening Temperature		°F	ASTM D1525
Optical	Nominal Value	Unit	Test Method
Haze		%	ASTM D1003
Additional Information
Tear Strength (MD), ASTM D1004: 8 kg/cm Tear Strength (TD), ASTM D1004: 10 kg/cm Spencer Impact Strength, ASTM D3420: 5 kg-cm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: YUCLAIR® FT860, YUCLAIR FT860, YUCLAIR® , YUCLAIR, YUCLAIRFT860, FT 860, FT860, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, SK Corporation, PolyethyleneLinearLowDensity, 860FT
Features
Features may also be described by the following terms: Good Processability, Easy Processing, High Tensile Strength, High Stiffness.
Uses
Uses may also be described by the following terms: Stretch Wrap, Cast Film.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.		°F
Cylinder Zone 2 Temp.		°F
Cylinder Zone 3 Temp.		°F
Die Temperature		°F
Extrusion Notes
Screw dia 50, Die width 450 Die gap 0.8, Screw RPM 31, L/S 7

Notes

¹Typical properties: these are not to be construed as specifications.

YUCLAIR® FT860

Linear Low Density Polyethylene

Supplied by SK Corporation