IDES Prospector Already have an account? Login Here

IDES

YUCLAIR® FV149M

Linear Low Density Polyethylene

Supplied by SK Corporation

The technical datasheet with complete property values for YUCLAIR® FV149M is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
YUCLAIR FV149M is butene-1 copolymer designed for use in general purpose film application.
YUCLAIR FV149M provides stronger film than ones made from competitive LLDPE film grades. Therefore YUCLAIR FV149M shows superior processibility, gel-free, antiblock and sealibility. Outstanding clarity and good processibility make this resin an ideal choice for film application when blended with conventional LDPE.
YUCLAIR FV149M can be processed readily into blown film using standard extrusion techniques.
YUCLAIR FV149M complies with FDA regulations in 21 CFR177.1520 for all food contact.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Additive 
  • Antiblock
  • Slip
  
Features 
  • Antiblocking
  • Food Contact Acceptable
  • Slip
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882
MD: 2.0 mil
psi
  
TD: 2.0 mil
psi
  
Tensile Strength 2
     ASTM D882
MD: Yield
psi
  
TD: Yield
psi
  
MD: Break
psi
  
TD: Break
psi
  
Tensile Elongation 2
     ASTM D882
MD: Break
%
  
TD: Break
%
  
Elmendorf Tear Strength
     ASTM D1922
MD: 2.0 mil
g
  
TD: 2.0 mil
g
  
Spencer Impact (2.0 mil)
in·lb
 ASTM D3420
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Optical
Nominal Value
Unit
Test Method
Haze (1.97 mil)
%
 ASTM D1003
Additional Information
Tear Strength (MD), ASTM D1004: 3 kg/cm
Tear Strength (TD), ASTM D1004: 8 kg/cm
Spencer Impact Strength, ASTM D3420: 8 kg-cm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: YUCLAIR® FV149M, YUCLAIR FV149M, YUCLAIR® , YUCLAIR, YUCLAIRFV149M, FV 149 M, FV149M, FV149, 149M, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, SK Corporation, PolyethyleneLinearLowDensity, 149FV
Features
Features may also be described by the following terms: Antiblocking, Unspecified Antiblock, Slip, Unspecified Slip.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Die Temperature
°F
  
Extrusion Notes
Screw dia 50, Die dia 150, BUR 2.2
Die gap 1.8, Screw RPM 45, L/S 7.2
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.