IDES Prospector Already have an account? Login Here

IDES

YUZEX® 2500S

High Density Polyethylene

Supplied by SK Corporation

The technical datasheet with complete property values for YUZEX® 2500S is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
YUZEX 2500S is high density polyethylene resin for medium or large containers (1 L - 25 L) such as detergents , kerosene cans, etc. It shows excellent escr property and impact strength by virtue of adequate molecular weight,molecular weight distribution and density. Also it has excellent processability especially in high speed molding due to the adequate anti-static property.Yuzex 2500S complies with FDA regulation 21 CFR177.1520.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Antistatic
  • Good Impact Resistance
  • Good Processability
  • High ESCR (Stress Crack Resist.)
  
Uses 
  • Containers
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
 
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: YUZEX® 2500S, YUZEX 2500S, YUZEX® , YUZEX, YUZEX2500S, 2500 S, 2500S, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, SK Corporation, PolyethyleneHighDensity, S2500
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Good Impact Resistance, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.