IDES Prospector Already have an account? Login Here

IDES

YUZEX® 8700

High Density Polyethylene

Supplied by SK Corporation

The technical datasheet with complete property values for YUZEX® 8700 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
YUZEX 8700 provides stronger film than ones made from competitive HDPE film grades. Therefore YUZEX 8700 shows superior stability in film extrusion to that of competitive HDPE film resins and gives excellent appearance to its film. YUZEX 8700 can be especially used in thin film such as roll bag, glove film and etc..
YUZEX 8700 complies with FDA regulations in 21 CFR177.1520 for all food contact.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Food Contact Acceptable
  • Pleasing Surface Appearance
  
Uses 
  • Bags
  • Film
  
Agency Ratings 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
 
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: YUZEX® 8700, YUZEX 8700, YUZEX® , YUZEX, YUZEX8700, 8700, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, SK Corporation, PolyethyleneHighDensity
Features
Features may also be described by the following terms: Pleasing Surface Appearance.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.