IDES Prospector Already have an account? Login Here

IDES

YUZEX® 3400

High Density Polyethylene

Supplied by SK Corporation

The technical datasheet with complete property values for YUZEX® 3400 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
YUZEX 3400 is a high-density polyethylene resin designed for monofilament & tarpaulin application. It shows high tenacity, stiffness and very good drawability. It is well adapted especially for low denier stretched application. Yuzex 3400 gives minimum die drool and excellent thermal stability because of its well designed antioxident package.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Additive 
  • Antioxidant
  • Medium Antiblock
  
Features 
  • Antioxidant
  • Good Thermal Stability
  • High Stiffness
  • Medium Antiblocking
  
Uses 
  • Monofilaments
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: YUZEX® 3400, YUZEX 3400, YUZEX® , YUZEX, YUZEX3400, 3400, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, SK Corporation, PolyethyleneHighDensity
Features
Features may also be described by the following terms: Good Thermal Stability, High Stiffness, Medium Antiblocking, Medium Antiblock.
Uses
Uses may also be described by the following terms: Monofilaments, Monofilament.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.