IDES Prospector Already have an account? Login Here

IDES

YUZEX® 6610

High Density Polyethylene

Supplied by SK Corporation

The technical datasheet with complete property values for YUZEX® 6610 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
YUZEX 6610 is high density polyethylene designed for non-pressurized pipe and produced by bi-modal operation in dual slurry reactor. It has an excellent processability in pipe extrusion due to the very broad MWD. YUZEX 6610 shows good stiffness and outstanding ESCR.
YUZEX 6610 complies with FDA regulation 21 CFR177.1520.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Good Processability
  • Good Stiffness
  • High ESCR (Stress Crack Resist.)
  • Med.-Wide Molecular Weight Distrib.
  
Uses 
  • Piping
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Pipe Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Additional Information
MWD, GPC: 20 to 30 Mw/Mn
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: YUZEX® 6610, YUZEX 6610, YUZEX® , YUZEX, YUZEX6610, 6610, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, SK Corporation, PolyethyleneHighDensity
Features
Features may also be described by the following terms: Good Stiffness, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Medium Molecular Weight Distribution, Wide Molecular Weight Distribution, Medium MW Distribution, Wide MW Distribution, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.