IDES Prospector Already have an account? Login Here

IDES

Ad-Tech Urethanes UC-4675

Polyurethane Thermoset Elastomer

Supplied by Ad-Tech Plastic Systems Corp.

The technical datasheet with complete property values for Ad-Tech Urethanes UC-4675 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Polyether Based
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • North America
Features 
  • Good Toughness
  • Low Shrinkage
  • Low Viscosity
Uses 
  • Molds/Dies/Tools
  • Seals
  
Appearance 
  • Amber
Forms 
  • Liquid
Processing Method 
  • Casting
Physical
Nominal Value
Unit
Test Method
Apparent Density
g/cm³
 ASTM D1895
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Yield)
%
 ASTM D638
Elastomers
Nominal Value
Unit
Test Method
Tear Strength
lbf/in
 ASTM D624
Compression Set
%
 ASTM D395
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Hardener
 
  
Resin
 
  
Pot Life (77°F)
min
  
Shelf Life (75°F)
wk
  
Thermoset Mix Viscosity (77°F)
cP
 ASTM D2393
Demold Time
      
77°F
min
  
150°F
min
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ad-Tech Urethanes UC-4675, AdTech Urethanes UC4675, Ad-Tech Urethanes , AdTech Urethanes, Ad:Tech Urethanes, Ad/Tech Urethanes, Ad+Tech Urethanes, Ad_Tech Urethanes, Ad Tech Urethanes, AdTechUrethanesUC4675, AdTechUrethanes, Ad_TechUrethanes, UC, UrethanesUC-4675, UrethanesUC4675, UrethanesUC:4675, UrethanesUC/4675, UrethanesUC+4675, UrethanesUC_4675, UrethanesUC 4675, UrethanesUC, UC-4675, UC4675, UC:4675, UC/4675, UC+4675, UC_4675, UC 4675, Polyurethane Thermoset Elastomer, TSU, Ad-Tech, PolyurethaneThermosetElastomer, 4675UC, 4675UrethanesUC
Features
Features may also be described by the following terms: Low Shrinkage, Good Toughness, Tough, Low Viscosity.
Uses
Uses may also be described by the following terms: Molds/Dies/Tools, Molds, Dies, tools.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.