IDES Prospector Already have an account? Login Here

IDES

Vi-Chem PVC VNC67E

Flexible Polyvinyl Chloride

Mineral Filler, 15%

Supplied by Vi-Chem Corporation

The technical datasheet with complete property values for Vi-Chem PVC VNC67E is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Mineral Filler, 15% Filler by Weight
Features 
  • Good Flexibility
Automotive Specifications 
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183/A
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress 2 (Yield)
psi
ISO 37
Tensile Elongation 2 (Break)
%
ISO 37
Tear Strength
lbf/in
ASTM D1004
Fogging 3 (185°F)
%
 
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore A, 15 sec)
 
ISO 868
Thermal
Nominal Value
Unit
Test Method
Cold Flexibility (-22°F, 1.6 in)
 
GM 9503P
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air (176°F, 168 hr)
%
ISO 188
Change in Tensile Strain at Break in Air (176°F, 168 hr)
%
ISO 188
Change in Shore Hardness in Air (Shore A, 176°F, 168 hr)
 
ISO 188
Additional Information
Nominal Value
Unit
Test Method
Color Stability
     
-- 4
 
 
-- 5
 
 
Fungal Resistance 6
 
 
Humidity 7
 
 
Pink Stain 8
 
 
Volatile Loss
%
ISO 176
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Vi-Chem PVC VNC67E, ViChem PVC VNC67E, Vi-Chem PVC , ViChem PVC, Vi:Chem PVC, Vi/Chem PVC, Vi+Chem PVC, Vi_Chem PVC, Vi Chem PVC, ViChemPVCVNC67E, ViChemPVC, PVCVNC 67 E, Vi_ChemPVC, PVCVNC67E, PVCVNC67, PVC, VNC 67 E, VNC67E, VNC67, 67E, Polyvinyl Chloride, Flexible, Polyvinyl Chloride Flexible, PVC, Flexible, PVC Flexible, Polyvinyl Chloride, Vi-Chem, PolyvinylChlorideFlexible, PVCFlexible, PolyvinylChloride, 67VNC, 67PVCVNC
Features
Features may also be described by the following terms: Good Flexibility, Flexible.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Type 1, 20 in/min
3GM9305P, Type A
4Xenon Arc per SAE J1885, 601.6 kJ/m², Surface defects, Delta E
5Xenon Arc per SAE J1885, 601.6 kJ/m², color change, Delta E
6GM9328P
7High temperature resistance, GM9329M
8GM9303P
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.