Lupolen 2420 D-TP LyondellBasell Polyethylene, Low Density

General

Material Status

Commercial: Active

Availability

Europe

Features

Good Flexibility

Good Toughness

Uses

Agricultural Applications

Building Materials

Construction Applications

Film

Packaging

Shrink Wrap

Forms

Pellets

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Yield)		psi	ISO 527-2
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Film Thickness - Recommended / Available
Tensile Strength			ISO 527-3
MD: 2.8 mil		psi
TD: 2.8 mil, Blown Film		psi
Tensile Elongation			ISO 527-3
MD: Break, 2.8 mil, Blown Film		%
TD: Break, 2.8 mil, Blown Film		%
Dart Drop Impact (2.8 mil, Blown Film)		g	ASTM D1709
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)			ISO 868
Ball Indentation Hardness (H 49/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306/A50
Peak Crystallization Temperature (DSC)		°F	ISO 3146
Optical	Nominal Value	Unit	Test Method
Gloss			ASTM D2457
20°, 2.76 mil
60°, 2.76 mil
Haze (2.76 mil)		%	ASTM D1003
Additional Information
Film properties taken from 70 µm blown film extruded at a melt temperature of 180°C and a blow-up ratio of 2:1. Failure Energy, DIN 53373, 70 µm: 6.5 J/mm Coefficient of Friction, ISO 8295: 70%
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel Product names can be difficult to match. You may have searched any one of these terms to find this product: Lupolen 2420 D-TP, Lupolen 2420 DTP, Lupolen , Lupolen2420DTP, 2420 D, 2420 D-TP, 2420 DTP, 2420 D:TP, 2420 D/TP, 2420 D+TP, 2420 D_TP, 2420 D TP, 2420D, DTP, 2420DTP, 2420D_TP, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, LyondellBasell, PolyethyleneLowDensity, D2420
Features
Features may also be described by the following terms: Good Toughness, Tough, Good Flexibility, Flexible.
Uses
Uses may also be described by the following terms: Shrink Wrap.

Extrusion	Nominal Value	Unit
Melt Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

Lupolen 2420 D-TP

Low Density Polyethylene

Supplied by LyondellBasell Industries