IDES Prospector Already have an account? Login Here

IDES

Hifax CA 02 A

Thermoplastic Polyolefin Elastomer

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Hifax CA 02 A is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
"Hifax" Ca 02 A is a thermoplastic polyolefin made by Basell proprietary technology, which has been developed for extrusion, calendering and blow moulding of very soft film and sheet.

Thanks to its extremely high rubber content, "Hifax" CA 02 A features outstanding low stiffness, excellent low hardness and good impact resistance.

"Hifax" CA 02 A shows as well high compatibility to fillers and to flame retardant agencies as other polyolefins.

The grade is available in natural pellets.

The polymer meets the FDA standard 21 CFR 177.2600 (rubber articles for repeated use). The final item is subject to the extraction tests according to the FDA specifications in FDA 21 CFR 177.2600 (d), (e), (f).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Impact Resistance
  • Low Hardness
 
Uses 
  • Film
  • Sheet
 
Agency Ratings 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Calendering
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
ASTM D638
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore A)
 
ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ISO 306/A50
Additional Information
Melting Temperature, MTM15902: 141°C
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Hifax CA 02 A, Hifax , HifaxCA02A, CA 02 A, CA02, 02A, CA02A, TPO, Thermoplastic Polyolefin Elastomer, TPO (POE), TPO POE, Thermoplastic Elastomer, TPE, LyondellBasell, ThermoplasticPolyolefinElastomer, TPOPOE, ThermoplasticElastomer, 02CA
Features
Features may also be described by the following terms: Good Impact Resistance, Low Hardness.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.