IDES Prospector Already have an account? Login Here

IDES

Adflex T 100 F

Polyolefin

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Adflex T 100 F is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Adflex T100F is a thermoplastic polyolefin, which has been developed to be used in extrusion and film applications.
Adflex T100F features a high softness and a very low modulus. It does does not contain any slip or anti blocking agent. Adflex T100F can be processed on a cast film line.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Good Flexibility
  • Medium Flow
  • Soft
Uses 
  • Bi-axially Oriented Film
  • Cast Film
  • Coating Applications
Forms 
  • Pellets
Processing Method 
  • Cast Film
  • Extrusion
  • Extrusion Coating
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (-40°F)
ft·lb/in²
 ISO 180
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A50
Additional Information
Flexural Modulus, ISO 178: <130 MPa
Notched Izod Impact Strength, ISO 180, -40°C: >40 kJ/m²
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Adflex T 100 F, Adflex , AdflexT100F, T 100 F, T100, 100F, T100F, Polyolefin, Unspecified, Polyolefin Unspecified, Polyolefin, LyondellBasell, PolyolefinUnspecified, 100T
Features
Features may also be described by the following terms: Good Flexibility, Flexible, Medium Flow, Medium Melt, Medium MFI.
Uses
Uses may also be described by the following terms: Cast Film, Bi-axially Oriented Film, Biaxially Oriented Film.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.