IDES Prospector Already have an account? Login Here

IDES

Ultradur® B 4300 G6 LS BK15073

Polybutylene Terephthalate

Glass Fiber Reinforcement, 30%

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultradur® B 4300 G6 LS BK15073 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
 
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Laser Markable
Uses 
  • Automotive Exterior Parts
Agency Ratings 
RoHS Compliance 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
lb/in³
ISO 1183 2
Water Absorption
     
73°F, 24 hr
%
ISO 62
Saturation
%
ISO 62 2
Equilibrium
%
ISO 62 2
Viscosity Number (Reduced Viscosity)
ml/g
ISO 1628
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Break)
psi
ISO 527-2 2
Tensile Strain (Break)
%
ISO 527-2 2
Flexural Modulus (73°F)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
ISO 180
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi)
°F
ISO 75-2 2
Melting Temperature (DSC)
°F
ISO 3146
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultradur® B 4300 G6 LS BK15073, Ultradur B 4300 G6 LS BK15073, Ultradur® , Ultradur, UltradurB4300G6LSBK15073, B 4300 G 6 LS BK 15073, B 4300 G6 LS BK15073, B4300, 4300G, G6, 6LS, LSBK, BK15073, B4300G6LSBK15073, Polybutylene Terephthalate, PBT, Polyester, BASF, PolybutyleneTerephthalate, 4300B
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Pressure
psi
 
Injection Rate
 
 
Back Pressure
psi
 
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.