|
Density
|
|
g/cm³
|
ISO 1183 |
|
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)
|
|
in³/10min
|
ISO 1133 |
|
Water Absorption
|
|
|
ISO 62 |
|
Saturation, 73°F
|
|
%
|
|
|
Equilibrium, 73°F, 50% RH
|
|
%
|
|
|
Tensile Modulus (73°F)
|
|
psi
|
ISO 527-2 |
|
Tensile Stress (Yield, 73°F)
|
|
psi
|
ISO 527-2/50 |
|
Tensile Strain (Yield, 73°F)
|
|
%
|
ISO 527-2/50 |
|
Nominal Tensile Strain at Break (73°F)
|
|
%
|
ISO 527-2/50 |
|
Charpy Notched Impact Strength (73°F)
|
|
ft·lb/in²
|
ISO 179/1eA |
|
Charpy Unnotched Impact Strength (73°F)
|
|
ft·lb/in²
|
ISO 179/1eU |
|
Heat Deflection Temperature (264 psi, Unannealed)
|
|
°F
|
ISO 75-2/A |
|
Melting Temperature (DSC)
|
|
°F
|
ISO 3146 |
|
CLTE - Flow (73 to 131°F)
|
|
in/in/°F
|
ISO 11359-2 |
|
Surface Resistivity
|
|
ohms
|
IEC 60093 |
|
Volume Resistivity
|
|
ohm·cm
|
IEC 60093 |
|
Relative Permittivity (73°F, 1 MHz)
|
|
|
IEC 60250 |
|
Dissipation Factor (73°F, 1 MHz)
|
|
|
IEC 60250 |
|
Comparative Tracking Index (Solution A)
|
|
V
|
IEC 60112 |
|
Flame Rating - UL (0.0630 in)
|
|
|
UL 94 |
|
Maximum Service Temperature (Short Cycle Operation): 100°C
POM-K, M-GNR, 03-002
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultraform® N2320 003 LEV, Ultraform N2320 003 LEV, Ultraform® , Ultraform, UltraformN2320003LEV, N 2320 003 LEV, N2320 003 LEV, N2320, 2320003, 003LEV, N2320003LEV, Acetal Copolymer, Acetal Copolymer, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, BASF, AcetalPOMCopolymer, 2320N
|
|
This plastic material has approval for 2 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1), PSA Peugeot-Citroën (1).
|
|
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
|