| Density |
|
g/cm³
|
ISO 1183 |
| Melt Volume-Flow Rate (MVR) (190°C/2.16 kg) |
|
in³/10min
|
ISO 1133 |
| Water Absorption |
|
|
ISO 62 |
|
Saturation, 73°F
|
|
%
|
|
|
Equilibrium, 73°F, 50% RH
|
|
%
|
|
| Tensile Modulus (73°F) |
|
psi
|
ISO 527-2 |
| Tensile Stress (Yield, 73°F) |
|
psi
|
ISO 527-2/50 |
| Tensile Strain (Yield, 73°F) |
|
%
|
ISO 527-2/50 |
| Nominal Tensile Strain at Break (73°F) |
|
%
|
ISO 527-2/50 |
| Charpy Notched Impact Strength (73°F) |
|
ft·lb/in²
|
ISO 179/1eA |
| Charpy Unnotched Impact Strength (73°F) |
|
ft·lb/in²
|
ISO 179/1eU |
| Heat Deflection Temperature (264 psi, Unannealed) |
|
°F
|
ISO 75-2/A |
| Melting Temperature (DSC) |
|
°F
|
ISO 3146 |
| CLTE - Flow (73 to 131°F) |
|
in/in/°F
|
ISO 11359-2 |
| Surface Resistivity |
|
ohms
|
IEC 60093 |
| Volume Resistivity |
|
ohm·cm
|
IEC 60093 |
| Relative Permittivity (73°F, 1 MHz) |
|
|
IEC 60250 |
| Dissipation Factor (73°F, 1 MHz) |
|
|
IEC 60250 |
| Comparative Tracking Index (Solution A) |
|
V
|
IEC 60112 |
| Flame Rating - UL (0.0630 in) |
|
|
UL 94 |
|
Maximum Service Temperature (Short Cycle Operation): 100°C
POM-K, M-GNR, 05-002
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultraform® W2320 003 LEV, Ultraform W2320 003 LEV, Ultraform® , Ultraform, UltraformW2320003LEV, W 2320 003 LEV, W2320 003 LEV, W2320, 2320003, 003LEV, W2320003LEV, Acetal Copolymer, Acetal Copolymer, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, BASF, AcetalPOMCopolymer, 2320W
|
|
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): PSA Peugeot-Citroën (1).
|
|
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
|