IDES Prospector Already have an account? Login Here

IDES

Kepamid® 1525SM7

Polyamide 6

Mineral Filler, 25%

Supplied by Korea Engineering Plastics Co., Ltd

The technical datasheet with complete property values for Kepamid® 1525SM7 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Kepamid 1525SM7 is a 25% mineral filled, reinforced, and impact modified polyamide-6.
It exhibits low warpage, good thermal properties, and good impact strength.
It is applicable to automotive, electrical, electronic, and industrial parts.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Mineral Filler, 25% Filler by Weight
Features 
  • Good Impact Resistance
  • Low Warpage
  
Uses 
  • Automotive Applications
  • Electrical Parts
  • Electrical/Electronic Applications
  • Industrial Applications
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (235°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 73°F)
psi
 ASTM D638
Tensile Elongation (Break, 73°F)
%
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
 DSC
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0315 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Kepamid® 1525SM7, Kepamid 1525SM7, Kepamid® , Kepamid, Kepamid1525SM7, 1525 SM 7, 1525SM7, 1525SM, SM7, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Korea Eng, Polyamide6, Nylon6, SM1525
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Good Impact Resistance, Low Warpage, Low Warp.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Hopper Temperature
°F
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.