IDES Prospector Already have an account? Login Here

IDES

Vi-Chem PVC V143-60I

Polyvinyl Chloride

Supplied by Vi-Chem Corporation

The technical datasheet with complete property values for Vi-Chem PVC V143-60I is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Automotive Specifications 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792A
--
g/cm³
 ISO 1183/A
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
      
Yield, 0.0787 in, Compression Molded
psi
 ISO 527-2/5
0.0787 in, Compression Molded 2
psi
 ASTM D638
Tensile Elongation (Break, 0.0787 in, Compression Molded)
%
 ASTM D638, ISO 527-2
Elastomers
Nominal Value
Unit
Test Method
Tear Strength
      
0.0787 in 3
lbf/in
 ASTM D624
0.0787 in 4
lbf/in
 ISO 34-1
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A, 15 sec, 0.0787 in, Compression Molded)
 
 ASTM D2240, ISO 868
Thermal
Nominal Value
Unit
Test Method
Cold Flexibility 5 (-40°F)
 
  
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air (185°F, 100 hr)
%
 ASTM D573, ISO 188
Change in Ultimate Elongation in Air (185°F, 100 hr)
%
 ASTM D573, ISO 188
Change in Mass in Air (185°F, 100 hr)
%
 ASTM D573
Change in Mass in Air (185°F, 100 hr)
%
 ISO 188
Flammability
Nominal Value
Unit
Test Method
Burning Rate
in/min
 ISO 3795
Additional Information
Nominal Value
Unit
Test Method
Florida Weathering - Delta E 6
 
 SAE J1976
Soiling 7
 
  
Xenon Arc - Delta E 8
 
 SAE J1885
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Vi-Chem PVC V143-60I, ViChem PVC V14360I, Vi-Chem PVC , ViChem PVC, Vi:Chem PVC, Vi/Chem PVC, Vi+Chem PVC, Vi_Chem PVC, Vi Chem PVC, ViChemPVCV14360I, ViChemPVC, V 143, PVCV 143 60 I, PVCV 143, Vi_ChemPVC, PVCV143-60I, PVCV14360I, PVCV143:60I, PVCV143/60I, PVCV143+60I, PVCV143_60I, PVCV143 60I, PVCV143, V 143 60 I, V143-60I, V14360I, V143:60I, V143/60I, V143+60I, V143_60I, V143 60I, V143, 14360, 60I, Polyvinyl Chloride, Unspecified, Polyvinyl Chloride Unspecified, PVC, Unspecified, PVC Unspecified, Polyvinyl Chloride, PVC, Vi-Chem, PolyvinylChlorideUnspecified, PVCUnspecified, PolyvinylChloride, 143V, 143PVCV
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Type IV, 20 in/min
3Die C
4Method Ba, Angle (Unnicked)
5FLTM BN 102-01
61 yr
7FLTM BN 112-08
8601.6 kJ/m²
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.