IDES Prospector Already have an account? Login Here

IDES

Makrofol® DE 1-4

Polycarbonate

Supplied by Bayer MaterialScience LLC

The technical datasheet with complete property values for Makrofol® DE 1-4 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PC-film, translucent, one side gloss, one side fine matte, thickness 50 - 750 micron.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Uses 
  • Film
Agency Ratings 
RoHS Compliance 
Appearance 
  • Translucent
Forms 
  • Film
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Water Absorption (73°F, 24 hr)
%
ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Films
Nominal Value
Unit
Test Method
Tensile Strength - MD
    ASTM D882
Yield
psi
 
Break
psi
 
Tensile Elongation - MD (Break)
%
ASTM D882
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
    ASTM D648
66 psi, Unannealed
°F
 
264 psi, Unannealed
°F
 
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
ASTM D257
Volume Resistivity
ohm·cm
ASTM D257
Dielectric Constant
    ASTM D150
60 Hz
 
 
1 MHz
 
 
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0150 in)
 
UL 94
Optical
Nominal Value
Unit
Test Method
Refractive Index
 
ASTM D542
Transmittance
%
ASTM D1003
Additional Information
Burning rate (US-FMVSS), ISO 3795: <=100 mm/min
Coefficient of linear thermal expansion, parallel, DIN 53752, 20 to 120 °C: 70 e-6/K
Coefficient of linear thermal expansion, transverse, DIN 53752, 20 to 120 °C: 70 e-6/K
Dielectric constant, Tinfoil electrodes, ASTM D150, 1 MHz: 2.9
Dielectric constant, Tinfoil electrodes, ASTM D150, 60 Hz: 3
Electrolytic corrosion, IEC 60426: A1
Luminous transmittance (clear transparent materials), ISO 13468-2, Type of light, C/2, O/D: >80 %
Shrinkage, across, IEC 60674, 130 °C, 1 h: 0.4 %
Shrinkage, parallel, IEC 60674, 130 °C, 1 h: 0.4 %
Tear strength, initial, ASTM D1004: 1110 lbf/in
Volume resistivity, Tinfoil electrodes, ASTM D257: 10E16 Ohm*m
Yellowness index, ASTM E313: 0.9
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Makrofol® DE 1-4, Makrofol DE 14, Makrofol® , Makrofol, MakrofolDE14, DE 1, DE 1-4, DE 14, DE 1:4, DE 1/4, DE 1+4, DE 1_4, DE 1 4, DE1, 14, DE14, DE1_4, Polycarbonate, PC, Bayer, 1DE
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (3).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.