IDES Prospector Already have an account? Login Here

IDES

Makrofol® DE 1-1

Polycarbonate

Supplied by Bayer MaterialScience LLC

The technical datasheet with complete property values for Makrofol® DE 1-1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PC-film, transparent, both sides gloss, thickness 125 - 750 micron, one or both sides either with cling (C) or stick (S) masking.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Excellent Printability
Uses 
  • Automotive Applications
  • Film
  • Medical Appliances
Agency Ratings 
RoHS Compliance 
Automotive Specifications 
Appearance 
  • Clear - Blue Tint
  • Clear/Transparent
  
Forms 
  • Film
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Water Absorption (73°F, 24 hr)
%
 ASTM D570
Films
Nominal Value
Unit
Test Method
Tensile Strength - MD
     ASTM D882
Yield
psi
  
Break
psi
  
Tensile Elongation - MD (Break)
%
 ASTM D882
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Vicat Softening Temperature
°F
 ISO 306
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.00500 in
 
  
0.0150 in
 
  
Optical
Nominal Value
Unit
Test Method
Gloss
 
 ASTM D2457
Transmittance
%
 ASTM D1003
Haze
%
 ASTM D1003
Additional Information
Burning rate (US-FMVSS), ISO 3795: <=100 mm/min
Gloss, ASTM D2457, 80°angle, black inked second surface: >/= 98 gloss unit
First Surface Roughness R3Z, ISO 4288: </= 0.5 Microns
Tear strength, ASTM D1004: 1100 lbf/in
Yellowness index, ASTM E313: 0.9
Conversion Factor: 180 ft²/ib-mil
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Makrofol® DE 1-1, Makrofol DE 11, Makrofol® , Makrofol, MakrofolDE11, DE 1, DE 1-1, DE 11, DE 1:1, DE 1/1, DE 1+1, DE 1_1, DE 1 1, DE1, 11, DE11, DE1_1, Polycarbonate, PC, Bayer, 1DE
Features
Features may also be described by the following terms: Excellent Printability, Printable.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1).
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (3).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.