IDES Prospector Already have an account? Login Here

IDES

Bayblend® FR 3030

Acrylonitrile Butadiene Styrene + PC

Supplied by Bayer MaterialScience LLC

The technical datasheet with complete property values for Bayblend® FR 3030 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
(PC+ABS) blend; unreinforced; flame-retardant; extrusion grade; Vicat/B 120 temperature = 115°C; good extrusion and vacuum-forming behaviour; UL recognition 94 V-0 (1.5 mm); halogen-free according to DIN VDE 0472,815; glow wire temperature (GWFI): 960 °C at 1.0 mm.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Flame Retardant
Features 
  • Flame Retardant
  • Halogen Free
  
Agency Ratings 
RoHS Compliance 
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
lb/in³
 ISO 1183 2
Melt Mass-Flow Rate (MFR) (260°C/5.0 kg)
g/10 min
 ASTM D1238
Melt volume-flow rate (260°C/5.0 kg)
in³/10min
 ISO 1133 2
Molding Shrinkage 3
     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Water Absorption
      
Saturation, 73°F, 0.125 in
%
 ISO 62
Saturation
%
 ISO 62 2
Equilibrium, 73°F, 0.125 in, 50% RH
%
 ISO 62
Equilibrium
%
 ISO 62 2
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
73°F 4
psi
 ASTM D638
--
psi
 ISO 527-2 2
Tensile Strength
      
Yield, 73°F 5
psi
 ASTM D638
Yield
psi
 ISO 527-2 2
Tensile Elongation
      
Yield, 73°F 5
%
 ASTM D638
Yield
%
 ISO 527-2 2
Break, 73°F 5
%
 ASTM D638
Nominal strain at break
%
 ISO 527-2 2
Impact
Nominal Value
Unit
Test Method
Unnotched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D4812
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed, 0.125 in
°F
 ASTM D648
66 psi
°F
 ISO 75-2 2
264 psi, Unannealed, 0.125 in
°F
 ASTM D648
264 psi
°F
 ISO 75-2 2
Vicat Softening Temperature
      
--
°F
 ASTM D1525 6
50°C/h, B (50N)
°F
 ISO 306 2
CLTE
     ISO 11359-2 2
Flow
in/in/°F
  
Transverse
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
      
--
ohms
 IEC 60093
--
ohms
 IEC 60093 2
Volume Resistivity
      
73°F
ohm·cm
 IEC 60093
--
ohm·in
 IEC 60093 2
Relative Permittivity
      
73°F, 100 Hz
 
 IEC 60250
73°F, 1 MHz
 
 IEC 60250
100 Hz
 
 IEC 60250 2
1 MHz
 
 IEC 60250 2
Dissipation Factor
      
73°F, 100 Hz
 
 IEC 60250
73°F, 1 MHz
 
 IEC 60250
100 Hz
 
 IEC 60250 2
1 MHz
 
 IEC 60250 2
Comparative Tracking Index
      
Solution A
V
 IEC 60112
--
 
 IEC 60112 2
Electric Strength
      
73°F
V/mil
 IEC 60243-1
--
V/mil
 IEC 60243-1 2
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0787 in
 
  
0.118 in
 
  
Burning Behav. at 1.6mm nom. thickn. (0.06 in, UL)
 
 ISO 1210 2
Burning Behav. 5V at thickness h (0.118 in, UL)
 
 ISO 10351 2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bayblend® FR 3030, Bayblend FR 3030, Bayblend® , Bayblend, BayblendFR3030, FR 3030, FR3030, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Bayer, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 3030FR
Features
Features may also be described by the following terms: Zero Halogen Content, Halogen Free.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (3).
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
3500 bar
40.039 in/min
50.20 in/min
6Rate B (120°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.