IDES Prospector Already have an account? Login Here

IDES

Bayblend® KU 2-1514

Acrylonitrile Butadiene Styrene + PC

Supplied by Bayer MaterialScience LLC

The technical datasheet with complete property values for Bayblend® KU 2-1514 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
High heat resistant injection molding grade; Vicat/B 120 temperature = 136 °C; UL-listing 94 V-0 at 1.5 mm (NC, GY, BK, WT); antimony-, chlorine- and bromine-free flame retardant; ball indentation temperature >=125 °C.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Flame Retardant
Features 
  • Flame Retardant
  • High Heat Resistance
  
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Viscosity vs. Shear Rate (ISO 11403-2)
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
--
lb/in³
 ISO 1183 2
Melt Mass-Flow Rate (MFR) (260°C/5.0 kg)
g/10 min
 ASTM D1238
Melt Volume-Flow Rate (MVR) (260°C/5.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage
      
Flow
in/in
 ASTM D955
Across Flow
in/in
 ASTM D955
Across Flow
%
 ISO 294-4
Flow
%
 ISO 294-4
Water Absorption
      
Saturation, 73°F
%
 ISO 62
Saturation
%
 ISO 62 2
Equilibrium, 73°F, 50% RH
%
 ISO 62
Equilibrium
%
 ISO 62 2
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 3
psi
 ASTM D638
--
psi
 ISO 527-2/1, ISO 527-2 2
Tensile Strength
      
Yield, 73°F 4
psi
 ASTM D638
Yield
psi
 ISO 527-2/50, ISO 527-2 2
Break, 73°F 4
psi
 ASTM D638
Break
psi
 ISO 527-2/50
Tensile Elongation
      
Yield, 73°F 4
%
 ASTM D638
Yield
%
 ISO 527-2/50, ISO 527-2 2
Break
%
 ASTM D638, ISO 527-2/50
Nominal strain at break
%
 ISO 527-2 2
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
      
73°F, 0.125 in
ft·lb/in
 ASTM D256
-22°F
ft·lb/in²
 ISO 180/1A
73°F
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact
      
73°F, 0.125 in
 
 ASTM D256
73°F
 
 ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed, 0.250 in
°F
 ASTM D648
66 psi, Unannealed
°F
 ISO 75-2/B
66 psi
°F
 ISO 75-2 2
264 psi, Unannealed, 0.250 in
°F
 ASTM D648
264 psi, Unannealed
°F
 ISO 75-2/A
264 psi
°F
 ISO 75-2 2
Vicat Softening Temperature
      
--
°F
 ASTM D1525 5, ISO 306/B120 5
50°C/h, B (50N)
°F
 ISO 306 2
CLTE
      
Flow: 73 to 131°F
in/in/°F
 ISO 11359-2
Flow
in/in/°F
 ISO 11359-2 2
Transverse: 73 to 131°F
in/in/°F
 ISO 11359-2
Transverse
in/in/°F
 ISO 11359-2 2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Comparative Tracking Index
      
Solution A
V
 IEC 60112
--
 
 IEC 60112 2
Electric Strength
      
0.0394 in
V/mil
 IEC 60243-1
--
V/mil
 IEC 60243-1 2
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0591 in
 
  
0.0787 in
 
  
0.118 in
 
  
Burning Behav. at 1.6mm nom. thickn. (0.06 in, UL)
 
 ISO 1210 2
Additional Information
Flexural stress at 5 % strain, ASTM D790: 14000 psi
Molding shrinkage, normal, based on ISO 2577, 150x105x3, 260 °C / MT 80 °C, 500 bar: 0.5 - 0.7 %
Molding shrinkage, parallel, based on ISO 2577, 150x105x3, 260 °C / MT 80 °C, 500 bar: 0.5 - 0.7 %
Spiral flow length, Bayer test, 2x8.7mm, 260°C: 270 mm
Strain at break, ISO 527-1,-2, 50 mm/min: >50 %
Tensile elongation at break, ASTM D638, 73 °F, 0.2 in/min: >50 %
Unnotched impact strength, ASTM D4812, 73 °F, 0.125 in: No Break
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bayblend® KU 2-1514, Bayblend KU 21514, Bayblend® , Bayblend, BayblendKU21514, KU 2, KU 2-1514, KU 21514, KU 2:1514, KU 2/1514, KU 2+1514, KU 2_1514, KU 2 1514, KU2, 21514, KU21514, KU2_1514, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Bayer, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 2KU
Features
Features may also be described by the following terms: High Heat Resistance.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (3).
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
31.0 in/min
40.20 in/min
5Rate B (120°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.