IDES Prospector Already have an account? Login Here

IDES

Marlex® TPO CHP-015

Polyolefin

Supplied by Phillips Sumika Polypropylene Company

The technical datasheet with complete property values for Marlex® TPO CHP-015 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Ductile
  • Low Temperature Flexibility
  • Soft
Uses 
  • Automotive Interior Parts
  • Automotive Interior Trim
  • Engineered Applications
  • Overmolding
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, Injection Molded)
psi
 ASTM D638
Flexural Modulus - Secant 3 (Injection Molded)
psi
 ASTM D790
Elastomers
Nominal Value
Unit
Test Method
Tear Strength 4
lbf/in
 ASTM D624
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (-40°F, Injection Molded)
 
 ASTM D256
Instrumented Dart Impact 5 (-40°F, Injection Molded, Total Energy)
in·lb
 ASTM D3763
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed, Injection Molded)
°F
 ASTM D648
Additional Information
The value listed as Tear Strength, ASTM D624, was tested in accordance with ASTM D1004.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Marlex® TPO CHP-015, Marlex TPO CHP015, Marlex® TPO , Marlex TPO, MarlexTPOCHP015, MarlexTPO, CHP, TPOCHP-015, TPOCHP015, TPOCHP:015, TPOCHP/015, TPOCHP+015, TPOCHP_015, TPOCHP 015, TPOCHP, CHP-015, CHP015, CHP:015, CHP/015, CHP+015, CHP_015, CHP 015, Polyolefin, Unspecified, Polyolefin Unspecified, Polyolefin, Phillips Sumika, PolyolefinUnspecified, 015CHP, 015TPOCHP
Features
Features may also be described by the following terms: Low Temperature Flexibility.
Notes
1Typical properties: these are not to be construed as specifications.
220 in/min
30.051 in/min
4Die C, 2.0 in/min
521.7 ft/sec
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.