IDES Prospector Already have an account? Login Here

IDES

TECHNYL® PSB 189

Polyamide

Glass Fiber Reinforcement, 30%

Supplied by Rhodia Engineering Plastics SA

The technical datasheet with complete property values for TECHNYL® PSB 189 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Particularly suitable for the molding of sports and leisure gods, such as parts for in-line skates(chassis).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Good Surface Finish
  • High Impact Resistance
  
Uses 
  • Sporting Goods
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Break, 73°F)
psi
 ISO 527-2
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Flexural Modulus (73°F)
psi
 ISO 178
Flexural Strength (73°F)
psi
 ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength (73°F)
--
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
--
ft·lb/in²
 ISO 179/1eU
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
--
°F
 ISO 75-2/A
Melting Temperature (DSC)
--
°F
 ISO 3146
Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity (1 MHz)
 
 IEC 60250
Dissipation Factor (1 MHz)
 
 IEC 60250
Electric Strength
--
V/mil
 IEC 60243-1
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating - UL (0.0630 in)
--
 
 UL 94
Additional Information
Dry
Notched Izod Impact, ASTM D256, 23°C, method A: 190 kJ/m²
Conditioned
Notched Izod Impact, ASTM D256, 23°C, method A: 290 kJ/m²
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: TECHNYL® PSB 189, TECHNYL PSB 189, TECHNYL® , TECHNYL, TECHNYLPSB189, PSB 189, PSB189, Polyamide, Unspecified, Polyamide Unspecified, Nylon, Unspecified, Nylon Unspecified, Polyamide, Nylon, Rhodia, PolyamideUnspecified, NylonUnspecified, 189PSB
Features
Dry
Features may also be described by the following terms: Good Surface Finish, High Impact Resistance.
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: TECHNYL® PSB 189, TECHNYL PSB 189, TECHNYL® , TECHNYL, TECHNYLPSB189, PSB 189, PSB189, Polyamide, Unspecified, Polyamide Unspecified, Nylon, Unspecified, Nylon Unspecified, Polyamide, Nylon, Rhodia, PolyamideUnspecified, NylonUnspecified, 189PSB
Injection
Dry
Unit
 
Drying Temperature
°F
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.