TECHNYL® PSA 018/A Rhodia Polyamide 66 (Glass Fiber Reinforcement, 25%)

Product Description

Technyl PSA 018/A is used for extrusion of the thermal brack for aluminium window frames and of semifinished profiles

General

Material Status

Commercial: Active

Availability

Europe

North America

Filler / Reinforcement

Glass Fiber Reinforcement, 25% Filler by Weight

Features

High Viscosity

Uses

Profiles

Appearance

Colors Available

Forms

Pellets

Processing Method

Extrusion

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183/A
Molding Shrinkage				ISO 294-4
Across Flow		--	%
Flow		--	%
Water Absorption (73°F, 24 hr)		--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (73°F)			psi	ISO 527-2
Tensile Stress (Break, 73°F)			psi	ISO 527-2
Tensile Strain				ISO 527-2
Yield, 73°F			%
Break, 73°F			%
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (73°F)			ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)			ft·lb/in²	ISO 179/1eU
Notched Izod Impact Strength (73°F)			ft·lb/in²	ISO 180
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		--	°F	ISO 75-2/A
Melting Temperature (DSC)		--	°F	ISO 3146
CLTE - Flow (73 to 185°F)		--	in/in/°F	ASTM D696
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity			ohm	IEC 60093
Volume Resistivity			ohm·cm	IEC 60093
Relative Permittivity (1 MHz)				IEC 60250
Dissipation Factor (1 MHz)				IEC 60250
Comparative Tracking Index (Solution A)			V	IEC 60112
Electric Strength			V/mil	IEC 60243-1
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL (0.0630 in)		--		UL 94
Additional Information
Dry	The values listed as Molding Shrinkage ISO 294 where tested in accordance with RHODIA-EP test method.
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: TECHNYL® PSA 018/A, TECHNYL PSA 018A, TECHNYL® , TECHNYL, TECHNYLPSA018A, PSA 018, PSA 018/A, PSA 018A, PSA 018:A, PSA 018+A, PSA 018-A, PSA 018_A, PSA 018 A, PSA018, 018A, PSA018A, PSA018_A, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Rhodia, Polyamide66, Nylon66, 018PSA
Generic Name
Dry	Generic Name may also be described by the following terms: PA66.
Conditioned	Generic Name may also be described by the following terms: PA66.
Features
Dry	Features may also be described by the following terms: High Viscosity.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: TECHNYL® PSA 018/A, TECHNYL PSA 018A, TECHNYL® , TECHNYL, TECHNYLPSA018A, PSA 018, PSA 018/A, PSA 018A, PSA 018:A, PSA 018+A, PSA 018-A, PSA 018_A, PSA 018 A, PSA018, 018A, PSA018A, PSA018_A, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Rhodia, Polyamide66, Nylon66, 018PSA

Extrusion	Dry	Unit
Drying Temperature		°F
Suggested Max Moisture		%
Cylinder Zone 1 Temp.		°F
Cylinder Zone 2 Temp.		°F
Cylinder Zone 3 Temp.		°F
Extrusion Notes
Draw-Plate Temperatures: 260 at 270°C

Notes

¹Typical properties: these are not to be construed as specifications.

TECHNYL® PSA 018/A

Polyamide 66

Glass Fiber Reinforcement, 25%

Supplied by Rhodia Engineering Plastics SA