IDES Prospector Already have an account? Login Here

IDES

IROGRAN® PS455-200

Thermoplastic Polyurethane Elastomer (Polyester)

Supplied by Huntsman Corporation

The technical datasheet with complete property values for IROGRAN® PS455-200 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
IROGRAN PS455-200 is a polyester based thermoplastic polyurethane intended for extrusion applications.

IROGRAN PS455-200 is part of the HUNTSMAN film and sheet product range and offers a specially designed, flexible material with a broad processing window particularly suitable for film and sheet, textile laminations, and compounding.

PERFORMANCE FEATURES
  • FDA grade (21 CFR 175.105, 177.2600)
  • Soft
  • High elongation
  • Tough
  • Good low temperature properties
  • Wide processing window

APPLICATIONS
  • Textile lamination
  • Compounding
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Chemical Resistance
  • Good Processability
  • Good Toughness
  • High Elongation
  • Soft
Uses 
  • Compounding
  • Film
  • Laminates
  • Sheet
  • Textile Applications
Agency Ratings 
 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Compounding
  • Film Extrusion
  • Sheet Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity 2
      
--
 
 ASTM D792
--
g/cm³
 DIN 53478
Melt Volume-Flow Rate (MVR) (177°C/2.16 kg)
in³/10min
  
Mechanical
Nominal Value
Unit
Test Method
Abrasion 2
      
--
mm³
 ASTM D395
--
mm³
 DIN 53516
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress 3
      
100% Strain, 0.0250 in
psi
 ASTM D412
100% Strain, 0.0250 in
psi
 DIN 53504
300% Strain, 0.0250 in
psi
 ASTM D412
300% Strain, 0.0250 in
psi
 DIN 53504
Tensile Strength 3
      
Break, 0.0250 in
psi
 ASTM D412
Break, 0.0250 in
psi
 DIN 53504
Tensile Elongation 3 (Break, 0.0250 in)
%
 ASTM D412, DIN 53504
Tear Strength 3
      
0.0250 in
lbf/in
 ASTM D624
0.0250 in
lbf/in
 DIN 53515
Compression Set 2
     ASTM D395, DIN 53517
73°F, 70.0 hr
%
  
158°F, 24.0 hr
%
  
Bayshore Resilience 2
%
 ASTM D2632
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A, Injection Molded)
 
 ASTM D2240, DIN 53505
Thermal
Nominal Value
Unit
Test Method
TMA 3
     Internal Method
High: 25.0 mil
°F
  
Low: 25.0 mil
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: IROGRAN® PS455-200, IROGRAN PS455200, IROGRAN® , IROGRAN, IROGRANPS455200, PS 455, PS 455 200, PS455-200, PS455200, PS455:200, PS455/200, PS455+200, PS455_200, PS455 200, PS455, 455200, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polyester), Thermoplastic Polyurethane Elastomer Polyester, TPU-Polyester, TPUPolyester, TPU:Polyester, TPU/Polyester, TPU+Polyester, TPU_Polyester, TPU Polyester, Thermoplastic Polyurethane, TPU, Huntsman, ThermoplasticPolyurethaneElastomerPolyester, ThermoplasticPolyurethane, 455PS
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Good Toughness, Tough, High Elongation, Good Chemical Resistance, Chemical Resistant.
Uses
Uses may also be described by the following terms: Compounding, Compounds.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (2).
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Hopper Temperature
°F
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Dew Point: -22°F
Notes
1Typical properties: these are not to be construed as specifications.
2Injection Molded
3Extruded Film
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.