IDES Prospector Already have an account? Login Here

IDES

IROGRAN® A 92 E 4670

Thermoplastic Polyurethane Elastomer (Polyester)

Supplied by Huntsman Corporation

The technical datasheet with complete property values for IROGRAN® A 92 E 4670 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
IROGRAN A 92 E 4670 is a thermoplastic polyester polyurethane for melt calendering.

IROGRAN is part of the HUNTSMAN technical extrusion/injection molding product range and offers a specially designed, flexible material with a broad processing window.

PERFORMANCE FEATURES
  • High oil resistance
  • High production rate
  • Good melt flow
  • Easy coloring
  • Complies with FDA CFR 175.105 / 177.2600

APPLICATION
  • Cable jacketing
  • Tubing
  • Technical extrusion
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Colorability
  • Good Flexibility
  • Good Flow
  • Oil Resistant
  
Uses 
  • Cable Jacketing
  • Tubing
  
Agency Ratings 
 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Calendering
  • Extrusion
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity 2
      
--
 
 ASTM D792
--
g/cm³
 DIN 53479
Melt Volume-Flow Rate (MVR) (190°C/10.0 kg)
in³/10min
  
Molding Shrinkage - Flow (Injection Molded)
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Abrasion 2
mm³
 DIN 53516
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress 3
      
100% Strain, 0.0250 in
psi
 ASTM D412
100% Strain, 0.0250 in
psi
 DIN 53504
300% Strain, 0.0250 in
psi
 ASTM D412
300% Strain, 0.0250 in
psi
 DIN 53504
Tensile Strength 3
      
Break, 0.0250 in
psi
 ASTM D412
Break, 0.0250 in
psi
 DIN 53504
Tensile Elongation 3
      
Break, 0.0250 in
%
 ASTM D412
Break, 0.0250 in
%
 DIN 53504
Tear Strength 3
      
0.0250 in
lbf/in
 ASTM D624
0.0250 in
lbf/in
 DIN 53515
Compression Set 2
      
73°F, 24.0 hr
%
 ASTM D395, DIN 53517
158°F, 24.0 hr
%
 ASTM D395
158°F, 24.0 hr
%
 DIN 53517
Bayshore Resilience
%
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240, DIN 53505
Shore A, Injection Molded
 
  
Shore D, Injection Molded
 
  
Thermal
Nominal Value
Unit
Test Method
TMA 2
     Internal Method
High
°F
  
Low
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: IROGRAN® A 92 E 4670, IROGRAN A 92 E 4670, IROGRAN® , IROGRAN, IROGRANA92E4670, A 92 E 4670, A92, 92E, E4670, A92E4670, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polyester), Thermoplastic Polyurethane Elastomer Polyester, TPU-Polyester, TPUPolyester, TPU:Polyester, TPU/Polyester, TPU+Polyester, TPU_Polyester, TPU Polyester, Thermoplastic Polyurethane, TPU, Huntsman, ThermoplasticPolyurethaneElastomerPolyester, ThermoplasticPolyurethane, 92A
Features
Features may also be described by the following terms: Good Flexibility, Flexible, Good Colorability, Good Flow.
Uses
Uses may also be described by the following terms: Tubing, Tube.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (2).
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Hopper Temperature
°F
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Injection Molded
3Extruded Film
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.